Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
Check that the spark plug is fitted with a suppressor. • Clean the cooling fins on the cylinder and check that the air intake near the starter is not blocked. • Check that the bevel gear is filled with grease up to 3/4. Use special grease. • Clean the air filter. Monthly maintenance • Clean the fuel tank. • Clean the outside of the carburettor and the space around it. • Clean the fan and the area around it. • Check fuel hose for cracks or other damage. Change if necessary. • Change the fuel filter in fuel tank. • Check the clutch, clutch springs and the clutch drum for wear. Replace if necessary. • Check electrical wires and connections. • Replace the spark plug. Check that the spark plug is fitted with a suppressor. • Change the air filter. • Check and clean the spark arrestor mesh on the muffler (only applies to mufflers fitted with a catalytic converter). English – 21 Technical data TECHNICAL DATA 123C 123L 123LD Engine Cylinder volume, cu.in/cm3 1,50/24,5 1,50/24,5 1,50/24,5 Cylinder bore, inch/mm 1,34/34,0 1,34/34,0 1,34/34,0 Stroke, inch/mm 1,06/27 1,06/27 1,06/27 Idle speed, rpm 2700 2700 2700 Recommended max. speed, rpm 11000-11700 11000-11700 11000-11700 Speed of output shaft, rpm 11700 8014 8014 Max. engine output, acc. to ISO 8893, kW/ rpm 0,65/7800 0,65/7800 0,65/7800 Catalytic converter muffler Yes Yes Yes Speed-regulated ignition system No No No Ignition system Manufacturer/type of ignition system WalbroMB/ WalbroMB/ WalbroMB/ SEM AM49 SEM AM49 SEM AM49 Spark plug Champion RCJ 7Y Champion RCJ 7Y Champion RCJ 7Y Electrode gap, inch/mm 0,02/0,5 0,02/0,5 0,02/0,5 Fuel and lubrication system Manufacturer/type of carburettor Zama C1Q Zama C1Q Zama C1Q Fuel tank capacity, US pint/litre 1,06/0,5 1,06/0,5 1,06/0,5 Weight Weight without fuel, cutting attachment and guard, Lbs/kg 8,8/4,0 9,3/4,2 9,5/4,3 Sound levels (see note 1) Equivalent sound pressure level at the user.s ear, 91/98 91/97 91/97 measured according to ANSI B175.3-1997, dB(A), min/ max: Vibration levels Vibration levels at handles, measured according to ANSI B175.3-1997, m/s2 At idle, left/right handles, min.: 2,7/1,5 1,8/1,4 1,8/1,4 At idle, left/right handles, max.: 3,5/1,7 2,8/1,8 2,8/1,8 At max. speed, left/right handles, min.: 5,1/9,3 3,5/4,1 7,8/6,2 At max. speed, left/right handles, max.: 7,8/10,9 8,3/9,1 10,3/12,1 Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed. NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values. 22 – English TECHNICAL DATA 123C Approved accessories Type Cutting attachment guard, Art. no. Arbor shaft thread 3/8 RH Trimmer head Trimmy Hit VII (R) 537 02 61-01 123L, 123LD Approved accessories Type Cutting attachment guard, Art. no. Arbor shaft thread M10 LH Trimmer head T35 503 93 42-02 / 503 97 71-01 Plastic blades Tricut O 300 mm 503 93 42-02 Attachments Art No. Use with Clean sweep attachment with shaft 537 19 67-01 123LD Hedge trimmer attachment with shaft 537 19 66-01 123LD Edger attachment with shaft 537 19 69-01 123LD Saw attachment with shaft 537 18 33-16 123LD Saw attachment without shaft 537 18 33-11 123L, 123LD English – 23 FEDERAL EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The EPA (The US Environmental Protection Agency), Environment Canada and Husqvarna Forest & Garden are pleased to explain the emissions control system warranty on your 2001 and later small nonroad engine. In U.S. and Canada, new small nonroad engines must be designed, built and equipped to meet the federal stringent anti-smog standards. Husqvarna Forest & Garden must warrant the emission control system on your small nonroad engine for the period of time listed below provided there has been no abuse, neglect or improper maintenance of your unit.Your emmission control system includes Parts such as the carburetor and the ignition system. Where a warrantable condition exists, Husqvarna Forest & Garden will repair your small nonroad engine at no cost to you. Expenses covered under warranty include diagnosis, parts and labor. MANUFACTURER. .... S WARRANTY COVERAGE The 2001 and later small nonroad engines are warranted for two years. If any emission related part on you engine (as listed above) is defective, the part will be repaired or replaced by Husqvarna Forest & Garden. OWNER. .... S WARRANTY RESPONSIBILITIES As the small nonroad engine owner, you are responsible for the performance of the required maintenance listed in your Operator. s Manual. Husqvarna Forest & Garden recommends that you retain all receipts covering maintenance on your small nonroad engine, but Husqvarna Forest & Garden cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintena...
Эта инструкция также подходит к моделям:Машинки для стрижки - 123LD (886.33 kb)
Машинки для стрижки - 123L (886.33 kb)