Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
On the remote (CFD-S38 only) 1 Press p. 2 Press MODE until “PGM” appears in the display. 3 Press the number buttons for the tracks you want to program in the order you want. 4 Press (. PLAY MODE MONO/ST DISPLAY ENT MEMORY =,+ p ^ 1 Press p. “Cd” appears in the display. 2 Press PLAY MODE•MONO/ST until “PGM” flashes in the display. 3 Press the =or +then press DISPLAY ENT• MEMORY for the tracks you want to program in the order you want. Programed track Playing order The programed tracks appear in the music calender. 4 Press ^to start program play. The CD Player Tips • You can play the same program again, since the program is saved until you open the CD compartment. • You can record your own program. After you’ve created the program, insert a blank tape and press rto start recording. To cancel Program Play Press PLAY MODE•MONO/ST until “PGM” disappears from the display. To check the order of tracks before play Press DISPLAY ENT•MEMORY. Every time you press the button, the track number appears in the programed order. To change the current program Press ponce if the CD is stopped and twice if the CD is playing. The current program will be erased. Then create a new program following the programing procedure. The CD The CD Player Enjoying sound effects (LOOP/FLASH) LOOP AUTO PRESET You can repeat part of a CD (LOOP) and can “flash” the CD sound (FLASH) during playback. FLASH 1 Play a CD. 2 Press and hold LOOP•AUTO PRESET or FLASH at the point you want to start the function. To Press and hold repeat a selected part of a CD LOOP• AUTO PRESET “flash” the CD sound FLASH To cancel the LOOP or FLASH function Release the button. The player returns to normal play. The CD Player The Radio Presetting radio stations You can store radio stations into the player’s memory. You can preset up to 20 radio stations, 10 for each band in any order. On the remote (CFD-S38 only) 1 Press BAND until the band you want appears in the display. 2 Tune in a station you want. 3 Hold down the number buttons that you want to preset the new station on for about 2 seconds. RADIO BAND DISPLAY ENT MEMORY LOOP AUTO PRESET PRESET +, – The Radio 1 Press RADIO BAND until the band you want appears in the display. 2 Hold down LOOP•AUTO PRESET for 2 seconds until “AUTO” appears in the display. The stations are stored in memory from the lower frequencies to the higher ones. If a station cannot be preset automatically You need to preset a station with a weak signal manually. 1 Press RADIO BAND to select the band. 2 Tune in a station you want. 3 Hold down DISPLAY ENT•MEMORY for about 2 seconds. 4 Press PRESET + or – until the preset number (1 to 10) you want for the station flashes in the music calender. 5 Press DISPLAY ENT•MEMORY. The new station replaces the old one. The Radio Playing preset radio stations Once you've preset the stations, use the RADIO BAND number buttons on the remote or PRESET +/– on the player to tune in to your favorite stations. PRESET +, – On the remote 1 Press RADIO BAND to select the band. (CFD-S38 only) 1 Press BAND to select 2 Press PRESET + or – to tune in the stored station. the band. 2 Press the number buttons to tune in the stored station. The Radio The Timer Setting the clock CLOCK “- -:- -” indication appears in the display until you set the clock. DISPLAY ENT MEMORY TIME SET TUNE +, – Tip The time display system: 12-hour system Before you set the clock, connect the AC power cord (page 24). 1 Press CLOCK for 2 seconds until the hour digit flashes. 2 Press TIME SET•TUNE + or – until you set the current hour. Then press DISPLAY ENT• MEMORY. The minute digits flash. Set the minutes by pressing TIME SET•TUNE + or – until the correct minute is displayed. / 3 Press DISPLAY ENT•MEMORY. The clock starts from 00 seconds. The Timer The Timer Waking up to music You can wake up to music or a radio program at a preset time. Make sure you have set the clock (“Setting the clock” on page 21). STANDBY TIMER DISPLAY ENT MEMORY TIME SET TUNE +, – Before you begin, make sure the t(clock) indication is not lit in the display. If it is lit, press STANDBY. 1 Prepare the music source you want to play. To play Do this the radio Tune in a station a CD Insert a CD 2 Press TIMER. The t(clock) and the music source (“Cd” or “RAdIO”) flash. 3 Select the music source (“Cd” or “RAdIO”) by pressing TIME SET•TUNE + or –, then DISPLAY ENT•MEMORY. 4 Set the timer to the hour you want the music to start by pressing TIME SET•TUNE + or –, then DISPLAY ENT•MEMORY. Set the minutes, then press DISPLAY ENT• MEMORY. 5 Set the timer to the hour and the minutes you want the music to go off. (Do as step 4.) The Timer Tips • To exit the standby mode, press STANDBY to make tdisappear from the display. • The preset settings remain until you reset them. 6 Press TIME SET•TUNE + or – to set the volume, then DISPLAY ENT•MEMORY. 7 Press STANDBY. The tindication lights up and the power goes off. At the preset time, the power will go on, and the music will play. Then the power will ...