Оценок - , средний балл:
(
)
)
Производитель: Panasonic
Размер: 664.54 kb
Название файла: RXDT530.PDF
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
If this occurs,- place the unit as far away from the set as possible. To resume play: Press ►/!! again. Recording Radio Broadcast Only normal tapes (TYPE'I) can be used. Preparation: Take up the leader tape before proceeding. 1 2 Tune in the broadcast station. (See page 7). Press STOP/EJECT and load the tape. Load the tape with the side to be- recorded facing you. Press REC. To stop the recording: STOP/EJECT Press STOP/EJECT. To stop the recording temporarily: Press PAUSE. To resume recording, press PAUSE again. Type of tape which can be used for recording: Normal position/TYPE I O High position/TYPE II X Metal/TYPE IV X The sound may not be recorded properly if high-position tapes and metal tapes are used with this unit. To take up the leader tape: Magnetic part of tape (Recording can be made.) Leader tape (Recording cannot be made.) To erase sound previously recorded on a tape: Recording new sound onto a pre-recorded tape automatically erases what was previously recorded. To erase all the sound on a tape: 1. Load the tape with the side whose recording is to be erased facing you. 2. Set SELECTOR to TAPE/Q23 ■ 3. Press REC. Recording Compact Discs Preparation: Insert the CD. Take up the leader tape before proceeding. SELECTOR Set SELECTOR to “ CD Press STOP/EJECT and load the tape. • Load the tape with the side to be recorded facing you. • Either have the leader tape wound up in advance or locate the position where recording is to begin. (See page 10). Press REC to start recording on the tape. CD play starts simultaneously. To stop the recording: stop/eject Press STOP/EJECT. To temporarily stop the recording: pause Press PAUSE. To resume recording, press PAUSE again. For your reference: • Any change made to the volume or tone quality during recording will not affect the recording. • in order to prevent trouble caused by flat batteries, it is recommended that you either supply power to the unit from the household AC outlet or replace all the batteries with new ones when you are recording something which is important to you. o 11 Recording Tape to Tape When the Deck 1 pause and record buttons are pressed, tape editing starts by pressing the Deck 2 playback button. 1 4 mt± selector Set SELECTOR to “TAPE/ ■CD 033”- Press the Deck 2 PLAY. Press Deck 1 STOP/EJECT and load the tape to be recorded. Load the tape with the side to be recorded facing you. Press Deck 2 STOP/EJECT and load the tape to be played back. Load the tape with the side to be played facing you. Editing is started by means of the synchro-start function. Do not set the “CD" or “TUNER" function selector during editing. Do not change the editing selector during editing. The playback sound may flutter. Some TV sets generate noise that could be recorded during editing. To prevent the possibility of this, do not use this unit closer than 1.5 m to a TV set. Recording is not affected by changes made to the volume or tone quality during the recording. To stop the editing: STOP/EJECT EDITING CD Select the editing speed by setting EDITING. HIGH : High speed NOR : Normal speed Press Deck 1 PAUSE, then Press the Deck 1 and Deck 2 STOP/EJECT. For your reference: Recording is not affected by changes made to the volume or tone quality during the recording. ii I • I press REC. 12 О Concerning Concerning Compact Discs Cassette Tapes Only compact discs having this mark can be used rJ""|HS5!!!P££I with this unit. (OJ0SGB DIGITAL AUDIO To remove a disc from its case Press the center holder and lift the disc holding by the edges. To hold the disc Hold the disc by the edges so the surface is not soiled with fingerprints. Fingerprints, dirt and scratches can cause skipping and distortion. {Correct) (Incorrect) To store a disc in its case Insert the disc with label facing upwards and press downward at the center. Label If the surface is soiled Wipe gently with a soft, damp (water only) cloth. (Correct) (Incorrect) O k If the disc is brought from a cold to a warm environmentmoisture may form on the disc Wipe this moisture off with a soft, dry, lint-free cloth before using the disc. Improper disc storage: You can damage discs if you store them in the following places; • Areas exposed to direct sunlight. • Humid or dusty areas. • Areas directly exposed to a heat outlet or heating appliance. Handling precautions: • Do not write on the label side with a ball-point pen or other writing utensils. • Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. • Do not soil with fingerprints. Selection of cassette tapes Only normal tapes can be used with this unit. Cassette tape exceeding 100 minutes: These tapes are handy for their long playback and recording time but be careful about repeatedly stopping and starting, rewinding and fast forwarding these tapes in short intervals as they are thin, tend to stretch and ...