Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
Be sure to set SELECTOR to TAPE/^^ to turn the unit off before connecting or disconnecting the speaker cables. Attaching the speakers Align the speaker with the main unit as shown in the figure, interlock the grooves and press down. Detaching the speakers Unlock the speaker release levers by pulling them in the direction shown below, and slide each speaker up. Connect the speaker cables to the speaker terminals. ^ I o m| 18M □ LÀ 1 Cl' Cl ( ^ Connect the speaker cable (black) to the © (negative) speaker terminal, and the other speaker cable (red) to the © (positive) speaker terminal. When using the unit with the speakers attached, wind the speaker cables as shown. €№ Since a strong magnet is used for the speaker, keep magnetized commuter passes, tickets or personal credit cards, recorded tapes, watches, etc. away from the unit. The speaker magnet in the unit may damage them. 4 Power Sources Supplied Accessory Please check and identify the supplied accessory. (Only for U.S.A.) To order accessories call MSC Accessory Dept. 1-800*332-5368. To operate AC power Connect the included AC power cord to the AC socket of the unit and your household AC outlet. To operate on battery power Battery installation Unplug the AC power cord from the household AC outlet and the AC socket of the unit. Insert six “D" size (R20/LR20 or equivalent, not included) batteries into the battery compartment, making sure that the batteries are installed in the designated numerical order and that the proper polarities are maintained. Outer row @ [¡j[]rjj[][^4] Q Inner row Q © • Batteries installed with incorrect polarities may leak and damage this unit. • Do not mix batteries (old and new) or types (manganese and alkaline, etc.). • If the unit is not used for a long period of time or is used only from an AC power source, remove the batteries to prevent potential damage from possible battery leakage. Battery removal Remove as shown in the figure below. the batteries out. Battery life When the batteries are weak, the tape speed will slow down, the sound will become distorted, and the volume will decrease. Replace all the batteries with new ones. Common Operations XBS To listen to the radio Set SELECTOR to “TUNER’ TUNER TAPE To listen to CDs £ «CD -TUNER ►TAPE Set SELECTOR to “CD”. To listen to tapes i ► CD • TUNER •TAPE Set SELECTOR to “TAPE/ 033” Adjusting the Volume _____VOLUME Turn VOLUME to adjust the volume to the desired level. (if yij Turn it clockwise to turn up the volume. vl )/i Turn it counter-clockwise to turn down the volume. MIN* • MAX Turning the unit off CD TUNER TAPE Set SELECTOR to “TAPE/ 0B”. Press STOP/EJECT if a tape is travelling. Adjusting the deep bass (XBS) XBS Turn XBS LEVEL to adjust the deep bass to the desired level. MlN*'-'•MAX Listening through headphones (not included) (o; PHONES t Turn down the volume and connect thé headphones to the PHONES jack. Plug type: Stereo mini Avoid listening for prolonged periods of time to prevent hearing damage. 6 listening to the Radio Listening to the Tape Selecting a radio station Set SELECTOR to “TUNER”. FM STEREO ' FM' AM' CD Set BAND as desired. 1ШГП 1111 It 11ТТП A. FMSTïRtO 1 FM' AM' CD Tune in the desired station using TUNING. : To heighten the frequency ' : To lower the frequency To receive FM stereo broadcasts: Set BAND to FM STEREO. When there, is too much noise accompanied during FM stereo broadcast, set BAND to “FM”. Adjusting the antenna For FM reception: Adjust the length and direction of the telescopic antenna. For AM reception: Adjust the direction in which the unit is pointed. For your reference: Radio broadcasts may be hard to receive in a building or moving vehicle because their signals are weak. Whenever possible, use the unit by a window. / U!± II Only normal tapes (TYPE I) can be used. Set SELECTOR to “TAPE/ 033”. Press STOP/EJECT and insert the tape to be played. Press PLAY to start play. To stop play: Press STOP/EJECT. To temporarily stop play: Press PAUSE. To resume play, press PAUSE again. To rewind or fast forward the tape In the stop mode, press REW/ REV or FF/CUE. Do not press PLAY during rewinding or fast forwarding, as this may jam the tape. Be sure to .press STOP/EJECT before proceeding to the next operation. To search a particular spot on a tape REW/REV FF/CUE During playback, press REW/ REV or FF/CUE. Tape play is resumed when the button is released. Type of tape which can be played on this unit: Normal position/TYPE 1 О High position/TYPE II X Metal/TYPE IV X This urrtt will not be able to do full justice to characteristics of high-position tapes and metal tapes even if they are played back. Listening to Compact Discs Set SELECTOR to “ CD Press CD ± , insert the CD with its label side facing up. L d \ 1 / -Ids' « s r l l_ o ►/» eg Press ► /11 to start play. Play starts from track 1 and continues t...