Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
When the letter you want is displayed, press 3 to move the cursor to the next position and then select the next letter. Press 2 to move backwards in the display. English 06 5 Move the cursor to the last position by pressing 3 after entering the title. When you press 3 one more time, the entered title is stored in memory. 6 Press BAND/ESC to return to the playback display. Notes • Titles remain in memory, even after the disc has been removed from the magazine, and are recalled when the disc is reinserted. • After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one. Displaying disc titles You can display the title of any disc that has had a disc title entered. Press DISPLAY. Press DISPLAY repeatedly to switch between the following settings: PLAY TIME (playback time)—DISC TITLE (disc title) When you select DISC TITLE, the title of the currently playing disc is shown in the display. • If no title has been entered for the currently playing disc, NO TITLE is displayed. En 25 Section Multi-CD Player Selecting discs from the disc title list Disc title list lets you see the list of disc titles that have been entered into the multi-CD player and select one of them to playback. 1 Press FUNCTION to select TITLE LIST. Press FUNCTION until TITLE LIST appears in the display. 2 Press 2 or 3 to scroll through the list of titles that have been entered. • Nothing is displayed for disc whose titles have not been input. 3 Press 5 to play your favorite CD title. That selection will begin to play. Using CD TEXT functions You can use these functions only with a CD TEXT compatible multi-CD player. Some discs have certain information encoded on the disc during manufacture. These discs may contain such information as the CD title, track title, artist’s name and playback time and are called CD TEXT discs. Only these specially encoded CD TEXT discs support the functions listed below. Displaying titles on CD TEXT discs Press DISPLAY when playing a CD TEXT disc from the multi-CD player. Press DISPLAY repeatedly to switch between the following settings: PLAY TIME (playback time)—DISC TITLE (disc title)—D.ARTIST (disc artist)—TRK TITLE (track title)—T.ARTIST (track artist) • If specific information has not been recorded on a CD TEXT disc, NO XXXX will be displayed (e.g., NO D-TITLE). Scrolling titles in the display This unit can display the first 10 letters only of DISC TITLE, D.ARTIST, TRK TITLE and T.ARTIST. When the recorded information is longer than 10 letters, you can scroll the text to the left so that the rest of the title can be seen. Press DISPLAY and hold until the title begins to scroll to the left. The rest of the title will appear in the display. 26 En Section 06 Multi-CD Player Using compression and bass emphasis You can use these functions only with a multi-CD player that supports them. Using COMP (compression) and DBE (dynamic bass emphasis) functions let you adjust the sound playback quality of the multi-CD player. Each of the functions have a two-step adjustment. The COMP function balances the output of louder and softer sounds at higher volumes. DBE boosts bass levels to give playback a fuller sound. Listen to each of the effects as you select through them and use the one that best enhances the playback of the track or CD that you are listening to. 1 Press FUNCTION to select COMP. Press FUNCTION until COMP appears in the display. • If the multi-CD player does not support COMP/DBE, NO COMP is displayed when you attempt to select it. 2 Press 5 or . to select your favorite setting. Press 5 or . repeatedly to switch between the following settings: COMP OFF—COMP 1—COMP 2—COMP OFF— DBE 1—DBE 2 English En 27 Section Audio Adjustments Introduction of audio adjustments 41 53 2 1 AUDIO display Shows the audio adjustments status. 2 LOUD indicator Appears in the display when loudness is turned on. 3 SW indicator Appears in the display when subwoofer is turned on. 4 F1 or F2 indicator The F1 or F2 indicator lights depending on the SFEQ setting. 5 CUSTOM indicator Appears in the display when equalization is adjusted. Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FADER (balance adjustment)—EQ (equalizer curve fine adjustment)—BASS (bass)—TRE (treble)—LOUD (loudness)—SUB.W (subwoofer output)—80HZ0 (subwoofer setting adjustment)—SLA (source level adjustment) • When selecting the FM tuner as the source, you cannot switch to SLA. • To return to the display of each source, press BAND/ESC. Notes • If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. • Audio Menu functions change depending on the rear output setting in the Initial Setting Menu. Refer to Switching the rear output setting on page 36. 28 En Section 07 Audio Adjustments Setting the sound focus equalizer Clarifying the sound image of vocals and instruments allows the simple staging of a nat...
Эта инструкция также подходит к моделям:Магнитолы - KEH-P6020R (830.1 kb)