Оценок - 1, средний балл: 4
(
)
)
|
Фото и характеристики Pioneer KEH-P6020R |
Фрагмент инструкции
• You can also sequentially select a disc by pressing 5/.. 4 To perform fast forward or reverse, press and hold 2 or 3. 5 To skip back or forward to another track, press 2 or 3. Pressing 3 skips to the start of the next track. Pressing 2 once skips to the start of the current track. Pressing again will skip to the previous track. Notes • When the multi-CD player performs the preparatory operations, READY is displayed. • If the multi-CD player does not operate properly, an error message such as ERROR-14 may be displayed. Refer to the multi-CD player owner’s manual. • If there are no discs in the multi-CD player magazine, NO DISC is displayed. 50-disc multi-CD player Only those functions described in this manual are supported for 50-disc multi-CD players. 20 En Section Multi-CD Player Introduction of advanced multi- CD player operation 1 1 FUNCTION display Shows the function status. Press FUNCTION to display the function names. Press FUNCTION repeatedly to switch between the following functions: REPEAT (repeat play)—TITLE LIST (disc title list)—RANDOM (random play)—SCAN (scan play)—ITS-P (ITS play)—PAUSE (pause)— COMP (compression and DBE) • To return to the playback display, press BAND/ESC. Note • If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display. English 06 Repeating play There are three repeat play ranges for the multi- CD player: MCD (multi-CD player repeat), TRK (one-track repeat), and DSC (disc repeat). 1 Press FUNCTION to select REPEAT. Press FUNCTION until REPEAT appears in the display. 2 Press 2 or 3 to select the repeat range. Press 2 or 3 until the desired repeat range appears in the display. • MCD — Repeat all discs in the multi-CD player • TRK — Repeat just the current track • DSC — Repeat the current disc Notes • If you select other discs during repeat play, the repeat play range changes to MCD (multi- CD player repeat). • If you perform track search or fast forward/reverse during TRK (one-track repeat), the repeat play range changes to DSC (disc repeat). En 21 Section Multi-CD Player Playing tracks in a random order Random play lets you play back tracks in a random order within the repeat range, MCD (multi- CD player repeat) and DSC (disc repeat). 1 Select the repeat range. Refer to Repeating play on page 21. 2 Press FUNCTION to select RANDOM. Press FUNCTION until RANDOM appears in the display. 3 Press 5 to turn random play on. RANDOM :ON appears in the display. Tracks will play in a random order within the previously selected MCD (multi-CD player repeat) or DSC (disc repeat) ranges. 4 Press . to turn random play off. RANDOM :OFF appears in the display. Tracks will continue to play in order. Scanning CDs and tracks While you are using DSC (disc repeat), the beginning of each track on the selected disc plays for about 10 seconds. When you are using MCD (multi-CD player repeat), the beginning of the first track of each disc is played for about 10 seconds. 1 Select the repeat range. Refer to Repeating play on page 21. 2 Press FUNCTION to select SCAN. Press FUNCTION until SCAN appears in the display. 3 Press 5 to turn scan play on. SCAN :ON appears in the display. The first 10 seconds of each track of the present disc (or the first track of each disc) is played. 4 When you find the desired track (or disc) press . to turn scan play off. SCAN :OFF appears in the display. The track (or disc) will continue to play. • If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION. Note • After track or disc scanning is finished, normal playback of the tracks will begin again. Pausing CD playback Pause lets you temporarily stop playback of the CD. 1 Press FUNCTION to select PAUSE. Press FUNCTION until PAUSE appears in the display. 2 Press 5 to turn pause on. PAUSE :ON appears in the display. Play of the current track pauses. 3 Press . to turn pause off. PAUSE :OFF appears in the display. Play will resume at the same point that you turned pause on. 22 En Section 06 Multi-CD Player Using ITS playlists ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi- CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selections. Creating a playlist with ITS programming You can use ITS to enter and playback up to 99 tracks per disc, up to 100 discs (with the disc title). (With multi-CD players sold before the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.) 1 Play a CD that you want to program. Press 5 or . to select a CD. 2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS. After TITLE IN is displayed, press FUNCTION repeatedly, the following functions appear in the display: TITLE IN (disc title input)—ITS (ITS programming) 3 Select a desired track by pressing 2 or 3. 4 Press 5 to store the currently playing track in the p...
Эта инструкция также подходит к моделям:Магнитолы - KEH-P6020RB (830.1 kb)