Войти:
Оценок - 4, средний балл: 4.3 ( )

Инструкция по эксплуатации Kenwood, модель AT-201

Производитель: Kenwood
Размер: 1.49 mb
Название файла: 41db359f-2d57-0514-3d62-5aa810129c58.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


2 and manufactured with highest quality of Features................................................................. 4 microelectronics technology and workmanship. We are Optional Accessories............................................ 5 confident that you will be entirely satisfied with the Controls and Connections.................................... 6 superb performance and reliability of this Hand-Held Getting Ready........................................................10 (H/H) Transceiver. Operation Controls................................................13 (1) Setting an Operating Frequency.........................14 Our very strict quality control and inspection ensure Expanding the receive frequency........................15 that each transceiver unit have left the factory-in Changing the memory to the channel mode........16 perfect condition. However, if your transceiver does not (2) Programming Frequency in Memory...................16 operate properly or if you find any difficulty in its (3) Recalling a Memory Frequency..........................17 operation, contact your dealer immediately. (4) Moving a Memory Frequency to VFO.................18 (5) Changing a Memory Frequency.........................18 Read this instruction carefully before use to make the (6) Deleting a Memory Frequency............................19 unit perform fully and last long. (7) Recalling a Call Frequency.................................20 (8) Moving a Call Frequency....................................21 (THIS DEVICE COMPLIES WITH PART 15 OF THE (9) Changing a Call Frequency to the VFO..............21 FCC RULES OPERATION IS SUBJECT TO THE (10)Scanning...........................................................22 CONDITION THAT THIS DEVICE DOES NOT CAUSE (11 )Switching the Transmit Power............................28 HARMFUL INTERFERENCE.) (12)Dual-Watch Operation.......................................29 (13)MHz Rotary Step...............................................32 (14)Changing the Frequency Step...........................33 (15)Battery-Save Function.......................................34 (16)Frequency Lock.................................................34 (17)PTT Lock...........................................................35 (18)Switching Pause Scan and Busy Scan.............35 (19)Tone Squelch Control........................................36 1 (20)Special Functions with SET Button......................37 (21)Pager and Code Squelch.....................................41 (22) Repeater Operation............................................. 49 (23)Exchange the Transmit and Receive Frequency during Repeater Operation.................................. 51 (24)Setting a Shift Frequency.....................................52 Troubleshooting.......................................................53 Specification.............................................................54 Warranty Card.......................................................... 56 BEFORE OPERATION IMake sure that batteries are . inserted .with correct polarity. 2 Do not disassemble and ■ tamper with cores and trimmers The Transceiver is produced under strict control and fully adjusted. 3. 4 Apply 5.0 to 16.0V DC power . supply only Keep out of high temperature, humidity and dust. 2 EQUIPMENT SUPPLIED 5 Do not use a new and used C Do not dispose a battery in ■ batteries together. O. fire. The Transceiver is normally supplied with the items listed below. When unpacking the unit carton check the all items are included. If items are missing, please notify your dealer immediately. ©User’s Manual © Hand Strap (Installed) © Antenna © Battery Pack © Jack Cover * ©Wall Charger © Belt Clip (Installed) **© DTMF **© Tone Squelch Unit * Optional item, it may not be shipped with your radio, please consult your local dealer. ** DTMF, Tone Squelch Unit (CTCSS) is installed for North America. 3 TABLE OF CONTENTS This is a highly versatile, yet compact hand-held transceiver that is built and tested to stringent specifications. The following features are built into your Transceiver. ☆ Smallest and lightest transceiver in this class. Dimensions: 83.5mm (height)x55mm(width)x31mm(depth) (excluding protrusions and battery case). Weight: 185g (excluding battery case and antenna) ☆ Paging function is available when an optional DTMF is installed. This feature allows you to page one specific station or all group stations via a 3-figured DTMF signal. When a paging signal is received, a beep sound and the display will inform you that someone has you paged. The paging station can be identified by means of its individual code. ☆ Code Squelch operation is available with when an optional DTMF is installed. The Transceiver will hear only stations using the identical code. ☆ Tone Squelch operation is available with an optional CTCSS. The Radio will hear only stations using the specific tone frequency. Tone frequencies can...

Эта инструкция также подходит к моделям:
Лодочное оборудование - AT-201 (1.49 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории