accessible brushes --should be performed by a Proceed as follows when replacement is required:. qualified service technician at a Sears store to • Unplug your saw. avoid risk of personal injury. & WARNING: Failure to unplug your saw could BRUSH REPLACEMENT result in accidental starting causing serious See Figure 36. injury. • Remove brush cap with a screwdriver. Brush assembly is spring loaded and will pop out when you remove brush cap. • Remove brush assembly. BRUSH • Check for wear. If worn, a

1 11 CRRFTSMRN"TABLESAW315.228110 The following tools are needed for assembly and alignment. Note: The four hex keys listed below have been provided with your saw. The remaining tools are typical shop tools and are not included with your saw. 3/8 in. NUT DRIVER FRAMING SQUARE 'U'l'O'l'l'l'l'l,U,l,l,l,l,t, ,_rl,g,f,v,l,l,l,l,l,l,l,U,l,f. .t.l,',l,*.l.,.l,L,J.l,l.,.I,*,l.*,l,,,I.,,I,_.l.,,I.i SOCKETWRENCH WITH7/16in.SOCKET ADJUSTABLE WRENCH SCREWDRIVER #2 PHILLIPS SCREWDRIVER FLATBLADE I_ COMBINAT

Model and serial number may be found at the rear of the base. You should record both model and serial number in a safe place for futu re use. CAUTION-. Read GENERAL and ADDITIONAL SAFETY INSTRUCTIONS CRRFTSHRHo 12-INCH MOTORIZED TABLE SAW • assembly • operating = repair parts Sold by SEARS, ROEBUCK AND CO., Chicago, IL 60684 U_S.A. Part No. 62597 L_ ;_,,,: FULL ONE YEAR WARRANTY ON CRAFTSMAN TABLE SAWS If within one year from the date of purchase, this Craftsman Table Sae fails due to a defect i

You should record both model and serial number in a safe place for future use. CAUTION: Read GENERAL and ADDITIONAL SAFETY IN ST R UCTIO N S caref ully CRRFTSMf,]I 7O-rNcH BAND SAW o assem bly o operating o repait parts Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A. Part No. SP5100 FULL ONE YEAR WARRANTY ON CRAFTSMAN BAND SAW lf within one year lrom the date of purchase, this Craftsman Band Saw fails due to a defect in material or workmanship, Sears will repair it, free of charge. WAR

1t3.2473t0 BAND SAW WITH CABINET S_rial Number __ Model and serial numbers may be found at the left-hand side of the base. You should record both model and serial number in a safe place for future USe. im N CAUTION: READALL INSTRUCTIONS CAREFULLY 113.247310 113.24 7210 CRRFTSMRN 12-1NCH BAND SAW • assembly • operating • repair parts _,. j ..... _,' Sold by SEARS,ROEBUCKAND CO., Chicago, IL 60684 U.S.A. Part No. SP5086 Printed in U.S.A FULL ONE YEAR WARRANTY ON CRAFTSMAN BAND SAW If within one ye

113.248320 Two Speed Band Saw with Leg Set Model No. 113.248440 Two Speed Electronic Band Saw with Leg Set Model No. 113.248510 Two Speed Electronic Band Saw with Cabinet S_rial Number . Model and s_rial numbers may b_ found at the left-hand side of the bas_. You should record both model and s_rial number in a safe place for futur_ US_. CAUTION: READALL INSTRUCTIONS CAREFULLY 113.248320 J 113.248440 113.248510 CRRFTSMRN 12-INCH BAND SAW • assembly • operating • repairparts J Sold by SEARS,ROEBUC

SE/ RS/C RRFTSM RN 10-INCH _BLE SAW oassembly . operating orepair parts Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A. Printed in U.S.A. Part No. SP5396 FULL ONE YEAR WARRANTY ON CRAFTSMAN TABLE SAW if within one year from the date of purchase, this Craftsman Table Saw fail= due to a defect In material or workmanship, Sears will repair it, freeo! charge. This warranty applies only while this product is In use Inthe United States. WARRANTY SERVICEISAVAILABLEBYSIMPLYCONTACTINGTHENEAREST

Model and sedal numbers may be found on the left rear side of the base, You should record both model and serial number in a safe place for future use, FOR YOUR READ ALL INSTRUCTIONS CAREFULLY ® 10 iNCH DIRECT DRIVE TABLE SAW -assembly . operating o repair parts J Sears, Roebuck and Co., Hoffman Estates, IL. 60179 U_S,A. Printed in US A Part No, SP5909 FULL ONE YEAR WARRANTY ON L,RAFTSNIAN STATIONARY TOOL If this stationary tool fails due to a defect in material or workmanship within one year fro

315.228310, 315.228410, 315.228510, 113.299310, 113.299410, 113.299510 Item No. _929993 TABLE SAWNOTINCLUDED Save this manual for future reference. • SAFETY _, CAUTION: Read and follow all Safety Rules and Operating • LOOSE PARTS Instructions before first use of • PREPARATION this product. • INSTALLATION • ALIGNMENT Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: 972000-662 3-99 READ ALL INSTRUCTIONS • ALWAYS WEAR SAFETY GLAS

It means attention.q! Your safety is involved. These included parts make up the the fence and rails accessory 9P9993. Fasteners are shown actual size. 1. Fence Rails 2. A, Fence ............................................................. 1 A. Front rail end cap ........................................... 2 B. Screw (1/4-20 x 3/8) ...................................... 2 B. Screw for end caps (5/32-32 x 1/2 in.) ........... 4 C. Fine Adjustment Knob ................................... 1 C, Rear