Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
TABLE SAW Model No. 137.248830 CAUTION: • Safety Instructions Before using this Table Saw, • Installation read this manual and follow • Operation all its Safety Rules and • Maintenance Operating Instructions • Parts List Customer Help Line 1-800-843-1682 Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Visit our Craftsman website: Part No. 13724883001 SECTION PAGE SECTION PAGE Warranty ........................................ 2 Know Your Table Saw ....................... 8 Product Specifications ....................... 2 Assembly and Adjustments ................. 9 Power Tool Safety ............................ 3 Operation ....................................... 16 Table Saw Safety .............................. 4 Maintenance ................................... 20 Electrical Requirements and Safety ...... 5 Troubleshooting Guide ....................... 21 Accessories and Attachments .............. 6 Parts List ........................................ 22 Tools Needed For Assembly ................ 6 Push Stick Pattern ........................... 30 Carton Contents .............................. 6 FULL ONE YEAR WARRANTY If this product fails due to a defect in material or workmanship within one year from the date of purchase, Sears will at its option repair or replace it free of charge. Contact a Sears Service Centre for replacement. If this product is used for commercial or rental purposes, this warranty applies only for 90 days from the date of purchase. This warranty is in addition to any statutory warranty. Sears, Roebuck & Co., Dept. 817 WA, Hoffman Estates, IL 60179 [A WARNING I Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints • Crystalline silica from bricks, cement and other masonry products • Arsenic and chromium from chemically treated lumber Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals work in a well-ventilated area and work with approved safety equipmentsuch as dust masks that are spec a y des gned to f ter out m croscop c part c es. MOTOR SAW HP (Maximum developed) ..... 3.0 Table Size ........................ 26-7/64" x 19-1/2" Type .................................. Universal Table Extensions ............... 3 Left, Right,Rear Amps ................................. 15 Extension Rip Capacity ....... 24" Right and Left Voltage .............................. 120 Blade Size ........................ 10" Diameter Hz ...................................... 60 Arbor Size ........................ 5/8" Diameter RPM (no load) .................... 5000 Rip Fence ........................ Self Aligning Overload Protection ............. YES Miter Gauge ...................... T-Slotted Maximum Cut Depth @ 90% 3" Maximum Cut Depth @ 45°.. 2-1/2" Maximum Dado Cut Width... 1/2" [A WARNING I Net Weight ...................... 65 LBS To avoid electrical hazards, fire hazards or damage to the table saw, use proper circuit protection. This table saw is wired at the factory for 110-120 Volt operation. It must be connected to a 110-120 Volt / 15 Ampere time delay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is worn, cut or damaged in any way. Before using your table saw, it is critical that you read and understand these safety rules. Failure to follow these rules could result in serious injury to you or damage to the table saw. I_ WARNING] Before using your table saw, it is critical that you read and understand these safety rules. Failure to follow these rules could result in serious injury or damage to the table saw. Good safety practices are a combination of common sense, staying alert and understanding how to use your power tool. To avoid mistakes that could cause serious injury, do not plug in your power tool until you have read and understood the following safety rules: 1. READ and become familiar with this entire Operator's Manual. LEARN the tool's applications, limitations and possible hazards. 2. [A WARNING I Look for this symbol that identifies important safety precautions. It means CAUTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! 3. NEVER OPERATE THIS MACHINE WITHOUT THE SAFETY GUARD IN PLACE FOR ALL THROUGH SAWING OPERATIONS. 4. DO NOT USE IN A DANGEROUS ENVIRONMENT such as damp or wet locations or exposure to rain. Keep work area well lighted. 5. DO NOT use power tools in the presence of flammable liquids or gases. 6. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents. 7. KEEP CHILDREN AWAY. All visitors should be keptat a safe distance from the work area. 8. DO NOT FORCE THE TOOL. It will do the job better and safer at the rate for which it was designed. 9. USE THE RIGHT TOOL. Don't force the tool or attachment to do a...