Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Children and infirm people must not use this tool. Children should be supervised at all times if they are in the area in which the tool is being used. It is also imperative that you observe the accident prevention regulations in force in your area. The same applies for general rules of occupational health and safety. WARNING. When using power tools, basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Also, please read and heed the advice given in the additional important safety instructions. Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction and design: • Contact with the blade. • Kickback of workpiece and parts of workpiece. • Blade fracture. • Catapulting of blade pieces. • Damage to hearing if effective earmuffs are not worn. • Harmful emissions of sawdust when the machine is used in closed rooms. Always use supplementary dust extraction where possible. • Do not use blades that are deformed or cracked. • Always remove the plug from the mains socket before making any adjustments or maintenance, including changing the blade. To ensure safe operation of the mitre saw you must follow these guidelines – • Select the correct blade for the material to be cut. • Do not use the saw to cut materials other than those recommended by the manufacturer. • The mitre saw can be safely carried by the main handle but only once it has been removed from the mains power and secured in the locked down position. • Do not use the saw without the guards in position, in good working order and properly maintained. • Ensure that the arm is properly secure when bevelling. • Keep the floor area around the machine level, well maintained and free of loose materials. • Provide adequate lighting. • Ensure that you are trained in the use, adjustment and operation of the machine. • Use correctly sharpened blades and observe the maximum speed marked on the blade. • Do not remove any cut-offs from the cutting area until the guard is fully locked in place and the blade has come to rest. • Ensure that the mitre saw is fixed to a bench wherever possible. • When cutting long pieces which extend well over the table width ensure that the ends are adequately supported at the same height as the saw table top. Supports should be positioned in such a way to ensure that the workpiece does not fall to the ground once the cut has been made. A number of supports at regular intervals may be required if the workpiece is extremely long. WARNING. When using power tools, basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Also, please read and heed the advice given in the additional important safety instructions. 1. Keep the work area clean and tidy. Cluttered work areas and benches invite accidents and injury. 2. Consider the environment in which you are working. Do not use power tools in damp or wet locations. Keep the work area well lit. Do not expose power tools to rain. Do not use power tools in the presence of flammable liquids or gases. 3. Keep visitors away from the work area. All visitors and onlookers, especially children and infirm persons, should be kept well away from where you are working. Do not let others in the vicinity make contact with the tool or extension cord. 4. Store tools safely. When not in use, tools should be locked up out of reach. 5. Do not force the tool. The tool will do the job better and safer working at the rate for which it was designed. 6. Use the correct tool for the job. Do not force small tools or attachments to do the job best handled by a heavier duty tool. Never use a tool for a purpose for which it was not intended. 7. Dress correctly. Do not wear loose clothing or jewellery. They can be caught in moving parts. Rubber gloves and non-slip footwear are recommended when working outdoors. If you have long hair, wear a protective hair covering. 8. Use safety accessories. Safety glasses and earmuffs should always be worn. A face or dust mask is also required if the drilling operation creates dust. 9. Do not abuse the power cord. Never pull the cord to disconnect the tool from the power point. Keep the cord away from heat, oil and sharp edges. 10. Secure the workpiece. Use clamps or a vice to hold the workpiece. It is safer than using your hand and frees both hands to operate the tool. 11. Do not overreach. Keep your footing secure and balanced at all times. 12. Look after your tools. Keep tools sharp and clean for better and safer performance. Follow the instructions regarding lubrication and accessory changes. Inspect tool cords periodically and, if damaged, have them repaired by an authorised service facility. Inspect extension cords periodically and replace them if damaged. Keep tool handles dry, clean and free from oil and grease. 13. Disconnect idle tools. Switch off the power an...
Эта инструкция также подходит к моделям:Лобзики и пилы - CDB250MS (1.27 mb)