Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
These instructions contain information necessary for safe and effective operation of this product. This product has unique features. Even if you are familiar with similar products, please read this manual carefully to make sure you get the full benefit from them. Keep this manual close to hand and ensure all users of this tool have read and fully understand them. Guarantee To register your guarantee visit our web site at and enter your details*. Your details will be included on our mailing list (unless indicated otherwise) for information on future releases. Details provided will not be made available to any third party. Purchase Record Date of Purchase: Model: Serial Number:________________________________ (located on motor housing) Retain your receipt as proof of purchase. If registered within 30 days of purchase GMC guarantees to the purchaser of this product that if any part proves to be defective due to faulty materials or workmanship within 24 MONTHS from the date of original purchase, GMC will repair, or at its discretion replace, the faulty part free of charge. This guarantee does not apply to commercial use nor does it extend to normal wear and tear or damage as a result of accident, abuse or misuse. * Register online within 30 days of purchase. Terms & conditions apply. This does not affect your statutory rights. Contents Description of symbols 3 Specifications 3 General safety instructions 4 Safety rules for laser lights 5 Additional safety rules for mitre saws 5 Accessories 7 Know your product 8 Unpacking 9 Transportation 9 Bench mounting 9 Stabiliser bar 9 Release knob 9 Slide lock 9 Mitre table lock 10 Bevel lock 10 Bevel adjuster 10 Clamp assembly 10 Spindle lock button 10 Rotating lower blade guard 10 Dust bag 11 Attaching the side bars 11 Trench depth adjustment 11 Turning on and off 11 Turning on the laser line generator 11 Setting the table square with the blade 12 Setting the fence square with the table 13 Changing a blade 13 Cross-cutting (without slide action) 15 Cross-cutting (with slide action) 15 Bevel cut 16 Compound mitre cut 16 Adjusting the laser lines 17 Using the laserguide system 17 Maintenance 18 Power cord maintenance 18 Cleaning 18 General inspection 18 GB 3 GENERAL SAFETY INSTRUCTIONS WARNING. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains- operated (corded) power tool or battery operated (cordless) power tool. 1. Work area safety a. Keep work area clean and well lit. Cluttered and dark areas invite accidents. b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2. Electrical safety a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adaptor plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3. Personal safety a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b. Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c. Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in...
Эта инструкция также подходит к моделям:Лобзики и пилы - DB250SMS (12.2 mb)
Лобзики и пилы - DB305SMS (12.2 mb)