Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE GUIDE D'UTILISATION USAR EL PRODUCTO. SI TIENE DUDAS, POR FAVOR LLAME. MANUAL DE INSTRUCCIONES DW744 Table Saw Scies circulaires a table Sierra de banco English WARNING: FOR YOUR • ALWAYS • DO NOT GLOVES, NECKTIES, • CONTAIN LONG • KEEP HANDS CAUTION WHEN • ALWAYS USE SAWING • USE A “PUSH STICK” • KNOW HOW TO • ALWAYS SUPPORT FENCE OR MITER • NEVER USE FENCE • NEVER REACH AROUND • SECURELY MOUNT SAW BLADE BEFORE • NEVER REMOVE JAMMED • DO NOT EXPOSE TO RAIN OR USE IN DAMP • SECURE TOOL PROPERLY • DO NOT OPERATE THIS UNDER THE INFLUENCE OF • FAILURE TO COMPLY WITH DEWALT… BUILT JOBSITE TOUGH DEWALT high performance industrial tools are made for America’s toughest industrial and construction applications. The design of every tool in the line – from drills to sanders to grinders – is the result of rigorous use on jobsites and throughout industry. Each tool is produced with painstaking precision using advanced manufacturing systems and intense quality control. Every tool is checked before it leaves the factory to make sure that it meets your standards for durability, reliability and power. DEWALT Built Jobsite Tough…WE GUARANTEE IT. 4 WARNING: For your own safety read instruction manual before operating table saw. WARNING: When using electric tools, basic safety precautions should always be followed to reduce risk of fire, electric shock, and personal injury, including the following: Double Insulation Double insulated tools are constructed throughout with two separate layers of electrical insulation or one double thickness of insulation between you and the tool’s electrical system. Tools built with this insulation system are not intended to be grounded. As a result, your tool is equipped with a two prong plug which permits you to use extension cords without concern for maintaining a ground connection. NOTE: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool. CAUTION: WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS. Repair or replace damaged cords. Polarized Plugs To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. Important Safety Instructions • KEEP GUARDS IN PLACE and in working order. • REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. • KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries. • DON’T USE IN DANGEROUS ENVIRONMENT. Don’t use power tools in damp or wet • ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they are not safety glasses. • SECURE WORK. Use clamps or a vise to hold work when practical. It’s safer than using your hand and it frees both hands to operate tool. • DON’T OVERREACH. Keep proper footing and balance at all times. • MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories. • DISCONNECT TOOLS before servicing; when changing accessories, such as blades, bits, cutters, and the like. • REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in off position before plugging in. • USE RECOMMENDED ACCESSORIES. Consult the instruction manual for recommended accessories. The use of improper accessories may cause risk of injury to persons. • NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted. • CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function–check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced. • DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only. • NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop. • REPLACEMENT PARTS. When servicing, use only identical replacement parts. Additional Safety Rules for Table Saw English locations, or expose them to rain. Keep work area well lighted. WARNING: For your own safety, do not operate your saw until it is completely assembled • WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, • WHEN changing saw location, dis...