Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
• Check water hoses for wear. Do not use old/used water inlet hoses. These may cause stains on your laundry. • Fit the drain hose into the waste water system securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is very important that the water intake and drain hoses are not folded, squeezed, or broken when the appliance is pushed into place after it is installed or cleaned. • Your washing machine is designed to continue operating when the power restores after a power interruption. You cannot cancel any programme by pressing the “On/Off button.” The machine will resume its programme when the power restores. Press the “Start/ Pause/Cancel” button for 3 seconds to cancel the programme (See, Cancelling a Programme) • There may be some water in your machine when you receive it. This is from the quality control process and is normal. It is not harmful to your machine. • Some problems you may encounter may be caused by the software. Press “Start/Pause/Cancel” button for 3 seconds to cancel the programme set in your machine before calling the authorized service. First Use • To prepare your machine for washing, carry out your first washing process without loading your machine and with detergent under “Cottons 90°C” programme. • Ensure that the cold water connections has been made correctly when installing your machine. • If the current fuse or circuit breaker is less than 15 Amperes, please have a qualified electrician install a 15 Ampere fuse or circuit breaker. • To make your machine ready for use, please be sure that the tap water supply and water drainage systems are appropriate before calling the authorized service. If they are not, call a qualified plumber to have any necessary arrangements carried out. Intended use • This product has been designed for home use. • The appliance may only be used for washing and rinsing of textiles that are marked accordingly. • Only detergents, softeners and supplements suitable for washing machines may be used. • Observe the care instructions labelled on textile products and any other instructions given by companies that produce detergents for your machine. Safety instructions • This appliance must be connected to an earthed outlet protected by a fuse of suitable capacity. always be securely fastened and remain in an undamaged state. • Fit the draining hose to a washbasin or waste system securely before starting up your machine. There may be a risk of being scalded due to high washing temperatures! • Never open the door or remove the filter while there is still water in the drum. Otherwise, there may be the risk of flooding and possible injury due to the hot water. • Never force open the locked door! The door will be ready to open just a few minutes after the washing cycle comes to an end. • Unplug the machine when it is not in use. • Never wash down the appliance with a water hose! There is the risk of electric shock! Always disconnect from the mains by unplugging before cleaning. • Never touch the plug with wet hands. Never unplug by pulling on the cable, always pull out from the plug only. Do not operate the machine if the power cord or plug is damaged. • Never attempt to repair the machine yourself. Otherwise, you may be putting yours and other’s lives in danger. • For malfunctions that cannot be solved by information in the operating manual: Turn off the machine, unplug it, turn off the water tap and contact an authorized service agent. If there are children in your house... • Electrical appliances may be dangerous for the children. Keep children away from the machine when it is operating. Do not let them tamper with the machine. • Close the door when you leave the area where the machine is located. • Store all detergents in a safe place out of reach of the children. • Use Child/Keylock to prevent children altering the settings Electrical connection Make sure that you have an earthed power outlet socket rated at 13 amps (minimum). Attention! If you place your machine under a worktop, the socket must be reachable after installation, or a separate switch (which can disconnect the two poles) must be used in the installation. Connect the power cord to the appropriate electrical socket with an equivalent current rating indicated on the rating plate at the front of the machine behind the kick plate. After removing the plug from its transit position, please insert the plug seal to prevent water spillage entering the machine. Electrical requirements Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply. We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position. Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised ...