Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
18. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the tool accidentally. 19. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tools or these instructions to operate power tools. Power tools are dangerous in the hands of untrained users. 20. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. 21. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. 22. Use the power and tool bits etc., with these instructions manner intended for type of power tool, account the working conditions and the work to be performed. Use of the power tool for operations from those intended could result a hazardous situation. SERVICE 23. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 3 SPECIFIC SAFETY RULES — SAWZALLS ® SPECIFIC SAFETY RULES — SAWZALLS ® FUNCTIONAL DESCRIPTION 1. Hold power tools by operation where the cutting Contact with a “live” wire will operator. 2. Keep hands away from all cutting 3. Use clamps or another practical way stable platform. Holding the work by hand or against your may lead to loss of control. 4. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement. 5. WARNING! Some dust created by power sanding, sawing, grinding, construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals • lead from lead-based paint • crystalline silica from bricks and cement and other masonry products, • arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out microscopic particles. Symbology Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current No Load Strokes Per Minute (SPM) Amps Straight Cut Orbital Cut 1. Speed control dial 2. Handle rotation button 3. Trigger 4. Quik-Lok ® cord 5. Rotating handle Cat. No. 6523-21 6. Nameplate 7. Insulating boot 8. Shoe release lever 9. 10. Blade 11. 12. Orbit control switch 10 4 5 6 7 8 9 Adjustable pivot shoe Quik-Lok ® blade clamp 12 11 1 3 Specifications 2 Cat. No. Volts AC Only Amps Length of Stroke Strokes per Minute 6523-21 120 13 1-1/4" 0 - 3000 4 5 GROUNDING 1. Handle Cat. No. 6536-21 2. Trigger 3. Cord 4. Nameplate 5. Insulating boot 2 6. Shoe release lever 7. 8. 9. 10. Improperly connecting the grounding wire can result in risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the cord or plug is dam-aged. If damaged, have it repaired by a MILWAUKEE service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. WARNING! The grounding prong through the green cord to the grounding system The green wire in the cord must only wire connected to the tool's system and must never be attached an electrically “live” terminal. Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in Figure A. Double Insulated Tools: Tools with Two Prong Plugs Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the Grounded Tools: applicable standards of Underwriters Laboratories, Inc., the Canadian Standard As- Tools with Three Prong Plugs Tools marked “Grounding Required” have sociation and the National Electrical Code. a three wire cord and three prong ground- Double Insulated tools may be used in ei ing plug. The plug must be connected to a ther of the 120 volt outlets shown in properly grounded outlet (See Figure A). If Figures B and C. the tool should electrically malfunction or break down, grounding provides a low re 4 5 6 8 9 10 Adjustable pivot shoe Blade Quik-Lok ® blade clamp Orbit control switch 1 3 7 sistance path to carry electricity away from the user, reducing the risk of electric shock....
Эта инструкция также подходит к моделям:Лобзики и пилы - 6536-21 (1.09 mb)