Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
Pick up work bowl, with handle facing you, and place it on base with handle at about 7 o'clock. Turn work bowl counterclockwise until it clicks. SLICING AND SHREDDING WITH THE SLICING AND SHREDDING DISCS 1 Lock bowl in place. (See 1 and 2 above.) Place disc, cutting side down, on flat, stable surface and hold it down firmly with one hand. With other hand, line up two symbols (oand a) on stem with similar symbols on disc. Turn stem clock wise until it clicks into position. Place metal blade over shall, matching outline O on top of hub to shape of shaft. Lower blade will almost touch bottom of bowl. Put cover on work bowl, with feed tube at about 7 o'clock. Turn cover counterclockwise until it fits into position. 3 Place disc over shaft, matching outline Q on its top to shape of shaft. Without touching blade edge, push disc down as far as it will go. Put cover on bowl, feed tube at 7 o'clock, and turn until it clicks. Insert food in feed tube. The pusher assembly slides over the large feed tube. It has a large pusher and a small pusher. Push the small white pusher all the way down and twist it to lock. Push the large pusher all the way down and push white Slide Lock right to lock. Twist small pusher to lock it and push Slide Lock to left to unlock ¦pusher sleeve. Slide large pusher sleeve over feed tube and push all the way down until tabs click into place. Cuisinart Cuisina1®is a registered Irademark of Cuisinart ISO Milford Road East Windsor. NJ 08520 1-800-726-0190 Printed in China CUI 9228.94 Locking Tab 6 Hold pusher with white Slide Lock toward you. Slide pusher over feed tube on cover and push locking tab down until locking tab clicks. CAUTION: Machine must be unplugged wnen you practice locking and unlocking pusher. Repeated locking and unlocking with machine plugged in is never neces sary in normal use and will make machine inoperable. 6 Apply even pressure to large pusher while holding lever down at PULSE position, and push food through. Plug in machine. Move control switch up to ON position to start motor. Move control switch down to OFF position to stop motor. Move control switch down to PULSE position and release it for pulse/chopping. If machine doesn't start, make sure it is plugged in and work bowl, cover and pusher assembly are locked in position. 8 To remove cover, hold pusher assembly with thumb away from two locking tabs. Turn and lift. The work bowl won't come off until the cover is unlocked. To remove pusher assembly, hold it with thumb on large tab. Press firmly on tab and lilt straight up. Cover will stay in place, allowing you to reload feed tube. 8 To remove disc from stem, slide button up as far as it will go and turn stem counterclockwise. IMPORTANT SAFEGUARDS Always follow these safety precautions when using this appliance. Getting Ready 1. Read all instructions. 2. Blades are sharp. Handle them carefully. 3. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning, to unplug, grasp plug and pull from electrical outlet. Never pull cord. 4. Do not use outdoors. 5. Do not let cord hang over edge of table or counter, or touch hot surfaces. 6. Do not operate any appliance with damaged cord or plug, or after appliance has been dropped or damaged in any way. Operation 1. Do not use pusher assembly if sleeve becomes detached from pusher. 2. Keep hands as well as spatulas and other utensils away from moving blades or discs while processing food, to prevent possibility of severe personal injury or damage to food processor. A plastic scraper may be used but must be used only when food proces sor motor is stopped. 3. Avoid contact with moving parts. Never push food down by hand when slicing or shredding. Always use pusher. 4. Make sure motor has been completely stopped before removing cover. (If machine does not stop within 2 seconds when you turn cover, call 1-800-726-0190 for assistance. Do not use machine.) 5. Never store any blade or disc on motor shaft. No blade or disc should be placed on the shaft except when the bowl is proper ly locked in place and the processor is in use. Store blades and discs, as you would sharp knives, out of reach of children. 6. Be sure cover is securely locked in place before operating food processor. 7. Do not try to override cover interlock mechanism. Cleaning To protect against risk of electrical shock, do not put base in water or other liquid. General 1. Close supervision is neces sary when any appliance is used by or near children. 2. Do not operate this, or any other motor-driven appliance, while under the influence of alcohol or other substances that affect your reaction time or perception. 3. This food processor is UL listed for household use. Use it only for food preparation as described in the accompany ing recipe and technique book. 4. The use of attachments not recommended or sold by Cuisinart may cause fire, electrical shock, personal injury or damage to your food processor. 5. To avoid possible malfunction o...
Эта инструкция также подходит к моделям:Кухонные комбайны - DLC-10S (4.71 mb)