Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
_ Fig, 4 1 Lock the Bowl onlo the Base as described inAssembly 2 Place the Chopping Blade onto the Center Post (see Fig. 4) CAUTJO N; Blades are sharp, Handte carefully, 1 3 Piece food to be chopped into Bowl Refer to Food Gutde to prepare food for chopping 4 Lock Bowf Cover Assembly onto Bowl, as described in Assembly 5 Lock the Food Pusher into the Movable Loop by totaling counterclockwise until the food pusher's tab is under slot in the movabte loop's tid, then lock feed chule tid irttothe spdng operated s}ide button by pressing down firmly 6 The Food Processor should be in the OFF position. Plug the cord into an electric outlet. The Power light itluminatas green 1o show it is connected Io a poweJ'source, and the OFF button Illuminates green if base, bowl, and cover assembly are al_locked inlo place 7 Turn the knob to ON to run constantly, or for better control over consistency, turn and held knob on PULSE When finished processing; • tl Pulsing, release Knob Switch and unit automatically stops. • If you turned processor to ON, turn Control Knob Switch to OFF lo stop ,, Allow the chopping biacie to stop rotating CHOPPING cent. NOTE: Before opening the Bowl Cover Assembly, turn the unit OFF and unplug the cord, g To remove bow_ cover, unlock by turning ._ockwise untti cover unialches, and lilt all. 10 Lilt the chopping blade by its base and remove. Unlock the Bow! by turning it clockwise, (see Assembly on pages 4 and 5), and lift off. Emply the processed food WARNING: Chopping Blade is very sharp, Use caution when handling, _1 TO SLICE OR SHRED: unplugged before use. Never use your hand to push food into processor, _ AUTION: Make sure control knob switch is turned to OFFend unit Is | The use of heavy pressure wtl! not speed operation. J 1 Lock the Bowl onto the Base as described in Assembly 2 Slide the disc slem down onto the center post of the base, then piace the sllce/shred disc, with the desired side facing up for either slicing or shredding, onto the disc stem and push down At this point the disc will be at the top of the bow] _ ARNING: Disc is very sharp, Use caution when handling. Slicing/Shredding 3o Lock the Food Pusher onto the movable loop by rotating counterclockwise until tab is under slot in the !top's lid At this point, Ihe movable Ioep works as part of the Iced pusher Lock Ihe Bowl Cover Assembly onto the Bowl. Open fhe Food Chute Lid by pulling out the siide button, and iitt up and out on the loop/food pusher (see Fig 3 and 3a), and ieave in the open posilion 4 Fill the food chute wilh pieces oI Iced such as potalo, cabbage, green pepper, whets tomato=sic, and look the food chula lid. See the Shredding or Slicing Guide for sizes of food pleces 5 Close food chute lid and latch into place. Plug the power cord into electric outlet Green Power light and green OFF light should illuminate to show that the food processor is properly assembled and ready to operate TO SLICE OR SHRED cont. 6 Turn control knob switch to ON, then press down lighl_y bul firmly on food pusher and movabia loop to lead items down and onto slice/shred d{sc. When the chute is empty. turn control knob switch to OFF, unplug, allow the disc to stop rotating, and unlatch the food chule lld 7 To process more food, place food into the foodchute and repeat above steps When finished, press OFF, unplug, and allow disc to stop rotating _ CAUTION: Before opening the Bowl Cover Assembly, besure you have turned the unit OFF and unplugged the cord, 8 Open bowl cover by turning clockwise, and remove disc with disc siam.. _ ARNING: Slicing/Shredding Disc is very sharp_ Use caution when handling, 9. Unlock Bowl by turning clockwise towards Unlock icon and lifl bow! of[ Emply the processed food TO PROCESS LONG AND THIN FOOD ITEMS unplugged beforeuse. Neveruse your handto pushfoDdintoprocessor° _ CAUTION: Make surecontrol knobswitch is turned to OFF and unit is The use of heavy pressure will not speed operation° t Lock theBowlonto theBaseasdescribedinAssembly 2 Slide lhe disc stem down onto the center post of the base, then place the slice/shred disc. with the desired side facing up for either slicing or shredding, onto lhe disc stem and push down At this point the disc will be at the top of the bowl _ WARNING: WARNING: Slicing/Shredding Disc ts very sharp, Use caution when handling. 3. Lock bowt cover assembly onto bowl 4. Make sure the food chute lid is latched into place TO PROCESS LONG ANDTHIN FOOD iTEMS cont. 5 Fill the movable loop with long and Ihie food items such as pepperor_i, carrots, or celery 6 Insert food pusher into the movable ieop Plug feed processor cord into etectric outteL Green Power light should be on, and the OFF Ughi should also be illuminated _ WARN|NG:NEVER use hand to push food directly, must aiways be used when processing food, Food pusher j 7 Turn the Knob Switch to ON, then press down tightly but firmly on food pusher to feed items down and onto slice/shred disc When the chute is empty turn the knob swtich to OFF...
Эта инструкция также подходит к моделям:Кухонные комбайны - 100.80002 (596.53 kb)
Кухонные комбайны - 100.82002 (596.53 kb)