Оценок - , средний балл: ( )

Инструкция по эксплуатации Hobart, модель 2912 ML-104821

Производитель: Hobart
Размер: 927.41 kb
Название файла:

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Installation, Operation, and Care of MODEL 2812 & 2912 SLICERS SAVE THESE INSTRUCTIONS GENERAL The model 2812 and 2912 slicers are equipped with a 1.2 HP (0.37 KW) motor and are available for single-phase electrical service. The slicer features the exclusive Hobart Stay-Sharp contoured cast solid stainless steel knife. The slicer is furnished with a cord and plug as standard equipment. Other features and options include: The Power Interrupt feature, standard, requires the slicer to be manually re-started after a power interruption. The Gauge Plate and Carriage Interlock feature, standard, prevents the Carriage Tray from being removed unless the Carriage is in the HOME position (pulled all the way to the front) and the Gauge Plate is CLOSED. When the Carriage Tray is tilted horizontally, the slicer will turn OFF if it has not previously been turned OFF. Once the Carriage Tray is tilted horizontally or removed, the slicer cannot be started and the Gauge Plate cannot be opened until the Carriage Tray is returned to its normal operating position. The HomeStart feature, standard, requires the carriage to be in the HOME position before the slicer can be started. The 2912 slicer features automatic slicing with six adjustable speeds. A tubular food chute, 4" (102 mm) leg set and slaw tray are other available accessories for 2812 and 2912. The low carriage fence is an accessory on 2812; it is standard on 2912. A high carriage fence is an accessory used with front mounted meat grips. The standard meat grip is front-mounted. Heavy front-mounted meat grip is an available accessory. Model 2812 Slicer Model 2912 Slicer – 2 – INSTALLATION UNPACKING Immediately after unpacking the slicer, check for possible shipping damage. If the slicer is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery. Prior to installing the slicer, test the electrical service to assure it agrees with the specifications on the machine data plate. The data plate is located on the right side of the slicer base. CARRIAGE TRAY The Carriage Tray is secured to the slicer when the knob on the Carriage Tray / Support Arm is turned clockwise until snug (Fig. 1). Refer to page 7 for assembly information. SHARPENER The Sharpener should already be mounted on top of the slicer and locked to its bracket (Fig. 1). TOP KNIFE COVER The Top Knife Cover should already be in place and secured with its Latch Knob (Fig. 1). DEFLECTOR The Deflector should already be mounted below the knife (Fig. 1). FENCE (Low and High Fences are used with front-mounted meat grip only.) Either Fence (Fig. 1) can be clamped on the Carriage Tray to limit product movement during slicing. Model 2812 SHARPENER DEFLECTOR PL-41408-1 TOP KNIFE COVER CARRIAGE TRAY CARRIAGE TRAY / SUPPORT ARM FENCE Fig. 1 2. 3.Slide Fence Up. Tighten Screw. ELECTRICAL WARNING: THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG. THE OUTLET TO WHICH THIS PLUG IS CONNECTED MUST BE PROPERLY GROUNDED. I...