Оценок - 4, средний балл: 3.5 ( )

Производитель: Cres Cor Размер: 177.2 kb Название файла: Язык инструкции:

(Total 4700 Watts.) HU-18-671-124-MP HU-18-671-137-MP 208 HU-18-671-125-MP HU-18-671-127-MP 240 HU-18-671-140-MP HU-18-671-144-MP 208 HU-18-671-141-MP HU-18-671-145-MP 240 1 60 23 208 30 1 3 208 6-30P 1 60 20 240 30 1 3 240 6-30P 3 60 13 208 20 3 4 208 L15-20P 3 60 12 240 20 3 4 240 L15-20P *NOTE: Suffix “F” for 5 preset keys, “T” for 10 preset keys. All models are designed for AC Service. HOW TO INSTALL CABINETS: CAUTION 1. Remove all packing material from inside cabinet. 2. Install the cabinet interior (pan slides). To install stacking units, refer to instruction sheet 3. Place hot unit (shipped separately) on the top of the FL-2211, “STACKING INSTALLATION”. cabinet. Caution: Hot unit is heavy, be sure to have plenty of help during installation. 4. Plug power cord into wall receptacle. Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • 5925 Heisley Road • Mentor, OH 44060-1833 Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • Ovens FL-2202-MP-M Rev. 1 (4/08) Page 4 of 10 OPERATING INSTRUCTIONS HOW TO START UNIT: (for fi rst-time operation only) A new oven needs to “burn off” factory oils and glue before it’s fi rst use. Do NOT load food into oven until this has been done! Push power switch to “ON”. Press the SELECT button and choose the TIMED mode. Press the COOK BUTTON and set the temperature to 350° F (177° C). Press the HOLD button and set the temperature to 150° F (66° C). Press the PROBE/TEMP button and set the time to 1 hour. Open upper door and move thumb screw on cabinet to open the cabinet vent. Allow oven to run automatically for one hour of COOK/RETHERM cycle and 30 minutes of HOLD cycle. HOW TO SET CONTROL: FOR TIMED COOK OPERATION Press the SELECT button to choose the Timed mode. COOKING TIME Press the PROBE/TIME button. The display will show the cook/retherm time. Use the UP and DOWN arrows to set the desired time. Press the SET Button to enter the time into the control. COOKING TEMPERATURE Press the COOK button and the display wil show the cook/retherm temperature. Use the UP and DOWN arrows to set the desired temperature. 1. 2. 3. 4. 5. 6. 7. 1. 2. 3. 1. 2. Press the SET button to enter the temperature into the control. NOTE: Press the OVEN TEMP button at any time to view the actual oven temperature. HOLDING TEMPERATURE Press the HOLD button and the display will show the holding temperature. Use the UP and DOWN buttons to set the desired temperature. Press the SET button to enter the temperature into the control. Press the START button and the display shows the remaining time in the cook/retherm cycle. NOTE: The control will beep after it times down to zero and then automatically switches to the Hold mode. The display will then show the hold setpoint temperature. FOR PROBE COOK OPERATION Press the SELECT button to choose the probe mode. PROBE TEMPERATURE Press the PROBE/TIME button and the display will show the probe setpoint temperature. Use the UP and DOWN arrows to set the desired temperature. ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: