Войти:
Скачали: 0   Размер: 3 mb   Производитель: Global Machinery Company  
Категория: Кромочные фрезеры
@name

A 4. Turn the table over and set it on its legs. Attaching the switch box 1. The switch box assemblbehind the lof the table. 2. Once the switch box is installed the on/off swibe positioned on the riside of the left leg. 3. An electric cord and an eoutlet for the router are located at the rear of the switch box (fig. C). 4 Place the switch box behind the left leg. 5. Align the screw holes on the top of the switch box with the 2 holes at the top of the left leg. y fits eft leg near the top tch wil

Скачали: 0   Размер: 1 mb   Производитель: Global Machinery Company  
Категория: Кромочные фрезеры
@name

DO NOT use the curved part of the router base against a simple guide piece. Using the parallel guide The parallel guide (17) is an effective aid to cutting in a straight line when chamfering or grooving. 1. Loosen the parallel guide locking knobs (15) 2. Feed the bars on the parallel guide through the holes in the router base (13) on the right hand side of the router in the feed direction. This will assist in keeping the guide flush with the side of the work piece. 3. Adjust the distance between

Скачали: 0   Размер: 433 kb   Производитель: Global Machinery Company  
Категория: Кромочные фрезеры
@name

NOTE. This router only accepts 6.35 (1/4”) collets. 1. Depress and hold the spindle lock (10) to stop the spindle from turning. 2. Whilst holding the spindle lock lock, loosen the collet nut by rotating it using the supplied spanner. 3. Remove the collet nut followed by the collet. 4. Install the new collet into the assembly; this is sometimes easier if the router is plunged to its full depth. 5. Install the collet nut and tighten by hand. 6. Firmly tighten the collet nut by depressing and holdi

Скачали: 1   Размер: 512 kb   Производитель: Global Machinery Company  
Категория: Кромочные фрезеры
@name

Скачали: 1   Размер: 1 mb   Производитель: Global Machinery Company  
Категория: Кромочные фрезеры
@name

Bevel scale 9. Bevel adjustment knob 10. Height scale 11. Height adjustment knob 12. Dust extraction port 13. Dust extraction adaptor 14. Dust bag 4 3 1 11 2 8 9 7 14 6 10 5 13 12 Overview The biscuit joiner is designed for the cutting and joining of dressed timber. It provides an accurate, effective and convenient alternative to other means of jointing such as dowelling and can be particularly useful for edge jointing long boards of natural wood or manufactured sheeting. The 100mm TCT blade is

Скачали: 0   Размер: 1 mb   Производитель: Global Machinery Company  
Категория: Кромочные фрезеры
@name

11350W BISCUIT JOINER BJ11OM INSTRUCTION MANUAL BlackCyanMagentaYellowCode: BJ110M IMDate: 060330Edition: 04Op: DCRBlackCyanMagentaYellowCode: BJ110M IMDate: 060330Edition: 04Op: DCR ContentsContents Warranty 2 Description of symbols 3 Specifications 3 Safety instructions 4 Additional safety rules for biscuit joiners 5 Contents of carton 6 Unpacking 6 Know your product 7 Overview 8 Adjusting the cutting depth 8 Adjusting the secondary handle 9 Adjusting the bevel angle 9 Adjusting the cutting he

Скачали: 0   Размер: 246 kb   Производитель: Global Machinery Company  
Категория: Кромочные фрезеры





Категории