Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
You have the following connection options: • Use the infrared (IR) or Bluetooth on your handheld to send and receive data from another infrared-enabled or Bluetooth-enabled device. • Connect to your Internet service provider (ISP). Once connected, you can send and receive email messages by using Inbox and view Web or WAP pages by using Microsoft® Pocket Internet Explorer. The communication software for creating an ISP connection is already installed on your handheld. Your service provider will provide software needed to install other services, such as paging and fax services. • Connect to the network at your company or organisation where you work. Once connected, you can send and receive email messages by using Inbox, view Web or WAP pages by using Microsoft® Pocket Internet Explorer, and synchronise with your computer. • Connect to your computer to synchronise remotely. Once connected, you can synchronise information such as your Pocket Outlook information. NOTE: Bluetooth is available only for n30-B. Transferring items using infrared or Bluetooth Using infrared (IR) or Bluetooth , you can send and receive information, such as contacts and appointments to/from other IR-enabled or Bluetooth-enabled devices. Your n30 will receive all incoming InfraRed (IR) or Bluetooth beams and asks you after the transmission has been established whether you wish to accept those beams. To know wheather Bluetooth is on, check the Bluetooth LED. The falshing Bluetooth LED indicates Bluetooth is on. The off Bluetooth LED indicates Bluetooth is off. There are only two modes - flashing or off, for Bluetooth LED. Refer to "Left view" on page 4 for the location of your handheld’s IR port. NOTE: Bluetooth is available only for n30-B. To send information via infrared 1 Switch to the program where you created the item you want to send and locate the item in the list. 2 Align the IR port of your handheld with that of the receiving IR-enabled device so that they are unobstructed and within a close range. 9 Getting connected Transferring items using infrared or Bluetooth 3 Tap and hold the item, and then tap Beam Item on the pop-up menu. -or- Send items (but not folders) using File Explorer. • Tap and hold the item you want to send and then tap Beam File on the pop-up menu. To receive information via infrared 1 Align the IR port of your handheld with that of the sending IR-enabled device so that they are unobstructed and within a close range. 2 Have the owner of the sending device transmit the information to you. Your handheld will automatically receive it. To send information via Bluetooth 1 Switch to the program where you created the item you want to send and locate the item in the list. 2 Tap-and-hold on the item and from the pop-up menu, tap send via Bluetooth. 3 On the Select a Bluetooth device screen, tap the name of the destination device, and then tap OK. To receive information via Bluetooth 1 Make sure that Bluetooth is enabled, and File Transfer service is also enabled. 2 Have the owner of the sending device transmit the information to you. Your handheld will automatically receive it. Note that if Authorization required or 9 Getting connected Connecting to the Internet Authentication (Passkey) required is checked in the File Transfer service Tab, you will be prompted to accept or enter passkey before allowing transmission. Connecting to the Internet To create a modem connection to an ISP 1 Obtain the following information from your ISP: • ISP server telephone number • User name and password • TCP/IP settings 2 Insert a SD Modem card (purchased seperately) into your handheld’s SD/MMC slot. NOTE: For instructions on inserting and using a SD Modem card, see the documentation that came with the card. 3 Tap and then Settings. In the Connections tab, tap Connections. Under My ISP, select Add a new modem connection. 4 Enter a name for the connection, such as "My Connection." 5 In the Select a modem list, select your modem type. If your modem type does not appear, try re-inserting the modem card. 6 You should not need to change any settings in Advanced. Most ISPs now use a dynamically-assigned address. If the ISP you are connecting to does not use a dynamically-assigned address, tap Advanced and then the TCP/IP tab, and enter the address. When finished, tap OK and then Next. 7 Enter the ISP phone number, and tap Next. 8 Enter your username, password and domain (if any), and tap Finish to complete the process. To connect to your ISP, open the Connections main window and tap Manage Existing Connections. Tap and hold on the applicable dial-up settings and select Connect. Your modem will dial-out and attempt to create the connection. To create a connection to an ISP over Bluetooth If you have access to a cellular phone with Bluetooth support, you can connect to online resources using your phone as a modem over a Bluetooth link. To configure your handheld to do this, select Add a New Modem Connection from the My ISP after tapping and then ...