Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
A reduction in image size will save a considerable amount of memory space for your project. In VT Pro-e, the Compress checkbox permits the image to be compressed when compiling. The 16 Bits checkbox converts a 24-bit or 32-bit image to 16 bits. This conversion to a 16-bit image may cause the loss of some subtle shading. To compensate for this, use the dithering to simulate the original shading. Various dithering types are available. Refer to the following illustrations. VT Pro-e “Page Properties” Window – Bit Depth Selection VT Pro-e “Image Properties” Window – Bit Depth Selection Hard Button Programming Four of the buttons can be programmed to access any frequently used command. Each button has a permanently fixed digital join number. The sequence of digital join numbers is (left to right) 1 through 4. Refer to the following diagram for their assigned join numbers. A description for each button signal is described in the SIMPL Windows help file (F1). Pushbutton Layout and Join Number Assignment Join1Join2Join3Join4 MultiByte International Characters Most languages use a single byte of eight bits to represent a character, e.g. English, French, German, Hebrew, Russian, Thai, etc. Multibyte character fonts require more than the usual eight bits to specify a character. This occurs when a language has more than 256 characters (28) in a font. For example, Chinese fonts contain several thousand characters. Other multibyte languages include Japanese and Korean. There are two separate applications with multibyte characters – static text on buttons and indirect text on buttons. No Isys touchpanel firmware changes are required in either case. Indirect text on a button is entered in VT Pro-e and the actual string to be displayed is entered in SIMPL Windows. As of this publication date only completely single byte or completely multibyte strings may be entered or they will not be compiled correctly in SIMPL Windows. In other words, you cannot enter Chinese characters interspersed with numbers. You can enter Chinese characters or numbers in separate strings or you can pad each number with “\x00” to make it multibyte and then combine it with Chinese characters in the same string. Of course you can always use the workaround of showing a graphic that displays the string but it is not dynamic. To compile and use multibyte characters it is essential that the operating system understand the language. Windows XP is available in many international languages and add-on software is available for other versions of Windows. Example Program An example program for the TPS-12B/W, TPS-15B/W & TPS-17B/W is available from the Crestron website (Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication. Once communication has been established, files (for example, programs, projects or firmware) can be transferred to the control system (and/or device). Finally, program checks can be performed (such as changing the device ID or creating an IP table) to ensure proper functioning. Establishing Communication Use Crestron Toolbox for communicating with the TPS-12B/W, TPS-15B/W & TPS-17B/W; refer to the Crestron Toolbox help file for details. There are three methods of communication. Direct Serial Communication NOTE: Required for initial setup of Ethernet parameters. Direct Serial Communication PC RUNNINGCRESTRON TOOLBOXTPS-12B/W, TPS-15B/Wor TPS-17B/WSERIAL VIA CRESTRONCABLE STCP-502PCOR EQUIVALENT • The RS-232 port on the TPS-12B/W, TPS-15B/W & TPS-17B/W connects to the serial port on the PC via a serial cable (Crestron STCP-502PC or equivalent). • Use the Address Book in Crestron Toolbox to create an entry using the expected serial communication protocol (RS-232, auto-detect baud rate, no parity, 8 data bits, 1 stop bit, XON/XOFF disabled, RTS/CTS disabled). • Display the TPS-12B/W, TPS-15B/W or TPS-17B/W’s “System Info” window (click the icon); communications are confirmed when the device information is displayed. Indirect Serial Communication Indirect Serial Communication PC RUNNINGCRESTRON TOOLBOXCONTROL SYSTEMTPS-12B/W, TPS-15B/Wor TPS-17B/WSERIAL ORETHERNETCRESNET • TPS-12B/W, TPS-15B/W or TPS-17B/W connects to control system via Cresnet. • Establish communications between the PC and the control system as described in the latest version of the 2-Series Control Systems Reference Guide (Doc. 6256). TCP/IP Communication NOTE: Required for operation with a Crestron control system. Ethernet Communication PC RUNNINGCRESTRON TOOLBOXTPS-12B/W, TPS-15B/Wor TPS-17B/WETHERNET • Establish serial communication between TPS-12B/W, TPS-15B/W or TPS-17B/W and PC. • Enter the IP address, IP mask and default router of the TPS-12B/W, TPS-15B/W or TPS-17B/W via the Crestron Toolbox (Functions | Ether...
Эта инструкция также подходит к моделям:Кпк - TPS-12B/W (2.86 mb)
Кпк - TPS-15B/W (2.86 mb)