Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
so as to prevent the abnormal operation. (ex:electronic quick start, ELBA, inverter type fluorescent lamp) 4 Wireless Remote Controller Part Description Flip-up door(Closed) LCD Screen Part Description Wireless Remote Controller Accessory Holder(1EA) Fixing Screw (2EA) User / Installation Manual AAA(1.5V) Batteries(2EA) ENGLISH Owner’s & Installation Manual 5 Part Description Wireless Remote Controller Signal transmitter Flip-up door ON OFF CANCEL AUTO CLEAN SET 5 1 3 10 9 17 1214 16 6 4 2 7 11 8 13 15 (opened) Cooling Operation Auto Operation or Auto Changeover Healthy Dehumidification Operation Heating Operation • Cooling Model( ), Heat Pump Model( ) Operation Mode NOTE 1. Start/Stop Button Operation starts when this button is pressed. 2. Operation Mode Selection Button Used to select the operation mode. 3. Room Temperature Setting Buttons Used to select the room temperature. 4. Indoor Fan Speed Selector Used to select fan speed in four steps low, medium, high and Chaos. 5. Jet Cool Speed cooling/heating operates super high fan speed. 6. Chaos Swing Button Used to stop or start louver movement and set the desired up/down airflow direction. 7. On/Off Timer Buttons Used to set the time of starting and stopping operation. 8. Time Setting Button Used to adjust the time. 9. Timer Set/Cancel Button Used to set the timer when the desired time is obtained and to cancel the Timer operation. 10. Sleep Mode Auto Button Used to set Sleep Mode Auto operation. 11. Air Circulation Button Used to circulate the room air without cooling or heating. 12. Room Temperature Button Used to set the desired horizontal airflow direction. 13. Plasma Used to start or stop the plasma-purification function. 14. Horizontal Airflow Direction Control Button Used to set the desired horizontal airflow direction. 15. Reset Button Initialize remote controller. 16. 2nd F Button Used prior to using modes printed in blue at the bottom of buttons. 17. Auto Clean Used to set Auto Clean mode. To use the functions printed in blue at the bottom of the buttons press 2nd F button first and then the required function button. Pressing the 2nd F button activates the blue printed function of the respective button. To cancel the function press the 2nd F button again else it will automatically cancel if remains idle after 10 seconds. 6 Wireless Remote Controller Installation Method Installation Method How to mount on a wall Insert Pull Wall How to insert batteries To insert the remote control to the holder. Use the screws to secure the holder to the wall or attach the holder side of indoor unit.1 2 1. Remove the cover from the back of the remote controller. • Slide the cover according to the arrow direction. 2. Insert two batteries. • Be sure that the (+) and (-) directions are correct. • Be sure that both batteries are new. 3. Re-attach the cover. • Slide the cover into back position. • Do not use rechargeable batteries such batteries are different from standard dry cells in shape, dimensions, and performance. • Change the batteries with a new one if the remote control does not work properly after using for an extended length of time. ENGLISH Owner’s & Installation Manual 7 How to use the Mode Selection Button How to use the Mode Selection Button Cooling Operation ON Cooling Healthy Dehumidification Auto Heating (Heat pump model only) To lower the temperature To raise the temperature Open the door on the Remote Controller. To select Cooling Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. Set the temperature lower than the room temperature. The temperature can be set within a range of 18°C~30°C in 1°C. You can select the fan speed in four steps-low, medium, high, or CHAOS. Each time the button is pressed, the fan speed mode is shifted. Natural wind by the CHAOS logic . For more fresh feeling, press the Indoor Fan Speed Selector and set CHAOS mode. In this mode, the wind blows like natural breeze by automatically changing fan speed according to the CHAOS logic. Press the Start/Stop button. The unit will respond with beep sound.1 2 3 4 8 Wireless Remote Controller How to use the Mode Selection Button Auto Operation ON Cooling Healthy Dehumidification Auto Heating (Heat pump model only) To lower the temperature To raise the temperature Press the Start/Stop button. The unit will respond with beep sound. Open the door on the Remote Controller. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. The temperature and fan speed are automatically set by the electronic controls based on the actual room temperature. If you want to change the set temperature, press the Room Temperature Setting buttons. The set temperature will be changed considering room temperature. DURING AUTO OPERATION: . You cannot switch the indoor fan speed. It has already been set by the Fu...