Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
•SmartSaverfunctionisonlyavailableinCoolmode. •WhenSmartSaverfunctionisactivated,temperaturerangewillbelimitedto 24°C~30°C. •Ifthedesiredtemperatureislowerthan24°C,turnofftheSmartSaverfunction by pressing the Smart Saver button again. •Temperature/Fanspeedcanalsobeadjusted(seepage11forinstructions). •Airflowcanbeadjustedmanually(seepage12forinstructions). •IfyoupresstheMode button while the Smart Saver function is on, it will cancel the function. Press the Smart Saver button once again. Cancel 15 Using the Quiet function You can reduce the noise generated from an indoor unit. Press the Quiet button on the remote controller while the air conditioner is operating in Cool/Heat mode. . Quiet indicator appears on the remote controller display. . The indoor unit will operate more quietly. •Ifusingamultisystem,thisfunctionwillworkonlywhentheQuietfunctionis set on all operated indoor units. Press the Quiet button once again. Cancel Using the Auto Clean function Auto clean function will prevent from growing mold by eliminating the moisture inside of the indoor unit. Your indoor unit evaporates the moisture inside of the unit. Activate this function to provide you with more clean and healthier air. Press the Auto Clean button. When the air conditioner is turned off, . The Auto clean indicator on the indoor unit display appears and the Auto cleaning function runs. When the air conditioner is turned on, . After stopping the air conditioner operation , the Auto clean indicator on the indoor unit display appears and the Auto cleaning function runs. . Auto Cleaning time can vary, depending on the previously used mode. Auto(cool), Cool, Dry mode : approximately 30 minutes. Auto(heat), Heat, Fan mode : approximately 15 minutes. Cancel Press the Auto Clean button once again. •Whentheairconditioneristurnedon,theAutocleanfunctionrunsafter stopping the air conditioner operation. 17 ENGLISH Cleaning the air conditioner Cleaning the indoor unit Cleaning the outdoor unit heat exchanger Opening the panel . Wipe the surface of the unit with a slightly wet or dry cloth when needed. . When dust accumulates on the heat exchanger, it may decrease cooling performance. Therefore, clean it regularly. . Spray water to clean the dust. Tightly grab top of the front panel and pull it down to open. Then slightly lift the panel up. • Do not clean the display using alkaline detergent. • Do not use sulfuric acid, hydrochloric acid, organic solvents (such as thinner, kerosene and acetone etc.) to clean the surface of the product or put any stickers on it. They may damage the surface of the air conditioner. • Be careful with the sharp edges on the outdoor unit heat exchanger. • If it is difficult to clean the outdoor unit heat exchanger on your own, contact service center. • Contact the service center when you clean the indoor unit heat exchanger because it needs to be disassembled. Heat exchanger (Illustration may differ slightly depending on the models) • Make sure the power is turned off and unplugged from the wall socket when cleaning the air conditioner. Maldive EUR_AQV09P@_IBIM_33360A_E.indd 17 2011-3-19 11:24:11 18 Cleaning the air conditioner Removing the Air fi lter Grab the handle and lift it up. Then, pull the Air fi lter towards you and slide it down. Air fi lter Cleaning the air fi lter Washable foam based air fi lter captures large particles from the air. The fi lter is cleaned with a vacuum or by hand washing. Open the panel and put the Air filter out. Insert the Air filter back in its original position and close the front panel. Dry the Air filter in a ventilated area. Clean the Air filter with a vacuum cleaner or soft brush. If dust is too heavy, rinse it with running water. • Clean the Air fi lter every 2 weeks or when the fi lter clean reminder lights up. Cleaning term may diff er depending on the usage and environmental conditions. In dusty area, clean it once a week. • If you turn off the air conditioner by pressing Power button, the fi lter clean reminder will be turned off . • If the Air fi lter dries in a confi ned (or humid) area, odors may generate. If it occurs, re-clean and dry it in a well-ventilated area. Maldive EUR_AQV09P@_IBIM_33360A_E.indd 18 2011-3-19 11:24:15 Maintaining the air conditioner If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition. 1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours and disconnect the power plug. There may be internal damage if moisture is left in components. 2. Before using the air conditioner again, dry the inner components of the air conditioner again by running in Fan mode for 3 to 4 hours. This helps remove odors which may have generated from dampness. Periodical checks Refer to the following chart to maintain the air conditioner properly. Type Description Every 2 weeks Every 3 months Every 4 months Once a year Indoor unit Clean the air filter (1) . Clean the condensate drain pa...
Эта инструкция также подходит к моделям:Кондиционеры - AQV09PSAN (5.16 mb)
Кондиционеры - AQV09PSAX (5.16 mb)
Кондиционеры - AQV09PSBN (5.16 mb)
Кондиционеры - AQV09PSBX (5.16 mb)