Оценок - 5, средний балл: 4.6
(
)
)
|
Фрагмент инструкции
Possible temperatures are between 26°C and 30°C inclusive. If you want to adjust temperature under 26°C, cancel the Energy saving mode before adjusting the temperature. 5 To select the fan speed, press the J-—- button one or more times I*_J until the required setting is displayed. 6 To control the direction of the air flow, refer to pages 16 and 17. e-14 Generating Anions The air conditioner can generate anions with an ionizer in the indoor unit. Since it is an additional function, you can select it any mode, even when the air conditioner is turned off. 1 Press the -4-^ button. Result: ♦ The air conditioner generates anions. ♦ The indoor unit beeps. £ If you press the -~a~- button during off, the air conditioner will turn on automatically and generate anions in the Fan mode with Low fan speed. £ If you wish to stop the Anions function, press the —3— button again. Result: The air conditioner is reset automatically to the previous mode, temperature and fan settings. 3 To control the direction of the air flow, refer to pages 16 and 17. 2 ENGLISH Adjusting the Air Flow Direction Vertically CD CZ^ 0 ©a CD CD On Off liner Timer Trier Set/Canrel CD CD CD Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the -J-L- button one or more times as required. Result: The outer blade is adjusted vertically. RECOMMENDATION When... Adjust the blade to face... Cooling Upwards. 2 If you want the blade to move up and down automatically when the air conditioner is operating, press the button. Result: The blade move up and down, around the base position set. 3 To stop the blade moving up and down, press the (- button again. (--) If you switch the air conditioner... Then the blade is... Off On again Closed completely. Set to the initial position powered. (e-16| Adjusting the Air Flow Direction Horizontally There are two sets of inner air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blades can be adjusted horizontally. 1 Adjust each set of inner blades to the required position, by pushing or pulling them sideways. ENGLISH Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. On 1 To set the operating time, press the button one or more times until the required time is displayed. Possible time is between 0.5 hour and 24 hours inclusive. Timer 2 Press the —i———-1 (Set/Cancel) button to complete the setting. Result: ♦ The remaining time is displayed. ♦ Blinking of the timer indicator stops. ♦ The selected mode and the temperature on the display disappear after 10 seconds. ♦ The air conditioner will switch on automatically when the counter displayed on the remote control reaches the set time and disappears the On timer setting. Mode 3 To select an operating mode in advance, press the Q button until the desired mode is displayed at the top of the remote control. Result: ♦ The air conditioner will run in the selected mode when it is turned on. To Cancel the On Timer Press the s—-—a——l (Set/Cancel) button. (-) Tinier Set/Canoal ♦ If you press the ( - button when the Off Timer is set, the Off Timer is also cancelled. e-18 Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. Off 1 To set the operating time, press the button one or more times until the required time is displayed. Possible time is between 0.5 hour and 24 hours inclusive. 2 Press the fewnccci (Set/Cancel) button to complete the setting. Result: ♦ The remaining time is displayed. ♦ Blinking of the timer indicator stops. ♦ The air conditioner will switch off automatically when the counter displayed on the remote control reaches the set time and disappears the Off timer setting. Example If you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours: On 1. Press the button until ‘2.0 Hr' is displayed. 2. Press the 11^ (Set/Cancel) button. 3. Press the button until ‘4.0 Hr' is displayed. 4. Press the aCCCCcc (Set/Cancel) button. C_J N®W& You can see or change the setting mode and/or the temperature by pressing the r's button or the C® C ®) button after setting the Off timer. To Cancel the Off Timer Timer Press the s*cccaC (Set/Cancel) button. ^--J Timer..... ♦ If you press the (-a button when the On Timer is set, the On Timer is also cancelled. 1 1 13. n UHr CD CD On Off Tmer Timer^A CZ> ENGLISH Setting the Sleep Timer The Sleep Timer can be used when you are cooling your room to switch the air conditioner off automatically after a period of 6 hours. Note If you wish to switch the unit off at a spe...
Эта инструкция также подходит к моделям:Кондиционеры - AS09P2GE1/ABS (6.09 mb)
Кондиционеры - AS12P4GE1/ABS (6.09 mb)
Кондиционеры - AS24P6GEA/SMR (6.09 mb)
Кондиционеры - AS24P6GEA1ABS (6.09 mb)