Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
E EEEEx xxxxa aaaam mmmmp ppppl lllle eeeeIf you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours: 1. Press the ON TIMER button until ‘2.0 Hr’ is displayed. 2. Press the (Set/Cancel) button. 3. Press the OFF TIMER button until ‘4.0 Hr’ is displayed. 4. Press the (Set/Cancel) button. N NNNNo oooot tttte eeeeYou can see or change the setting mode and/or the temperature by pressing the MODE button or the TEMPERATURE buttons after setting the Off timer. To Cancel the Off Timer To cancel the Off Timer, press the OFF TIMER button one or more times until the timer setting disappears. Press the (Set/Cancel) button. N NNNNo oooot tttte eeee If you want to turn off the air conditioner before the timer reaches E-19 ENGLISH the setting time, press the (ON/OFF) button. E-20 Setting the Sleep Timer The Sleep Timer can be used when you are cooling or heating your room to switch the air conditioner off automatically after a period of six hours. N NNNNo oooot tttte eeeeIf you wish to switch the unit off at a specific time, refer to page 19. 1 Make sure that you have selected either COOL or HEAT mode. 2 Press the button one or more times until appears on the remote control. Result: The indoor unit beeps. . The air conditioner will be controlled as indicated in the illustrations below. Cooling The desired temperature is increased by 1°C every hour. When it has been increased by 2°C (after two hours), the temperature is maintained for four hours. Heating The desired temperature is decreased by 1°C every hour. When it has been decreased by 2°C (after two hours), the temperature is maintained for four hours. To Cancel the Sleep Timer If you no longer wish to use the Sleep Timer that you have set, you can cancel it at any time. Press the button. Result: The indoor unit beeps. The is no longer displayed. The air conditioner operates normally. Operating Recommendations Here are a few recommendations that you should follow when using your air conditioner. Topic Recommendation Heating performances The heat pump inside the air conditioner absorbs heat from outside air and brings it indoors. If the temperature of the outside air drops, the air conditioner will heat less. If you find that the room is not warm enough, use an additional heating appliance. Warm air circulation The air conditioner circulates warm air to heat your room; as a result, some time will be required after starting the air conditioner to warm the entire room. If necessary, set the air conditioner on before you wish to use the room. Frost When outside temperatures are low and humidity is high, frost may form in the outdoor unit when heating is selected. If this happens: The heating operation is stopped. The Deice mode is triggered automatically for about seven minutes. No intervention is required from you; after about seven minutes, the air conditioner starts operating again normally. High indoor and outdoor temperatures If both the indoor and outdoor temperatures...
Эта инструкция также подходит к моделям:Кондиционеры - AQ07A1ME (1.31 mb)
Кондиционеры - AQ07A2ME (1.31 mb)
Кондиционеры - AQ07A3ME (1.31 mb)
Кондиционеры - AQ07A4ME (1.31 mb)