Войти:
Оценок - 5, средний балл: 4.8 ( )

Инструкция по эксплуатации Samsung, модель AQ09A6MA

Производитель: Samsung
Размер: 1.31 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


The indoor unit beeps. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. 2 If the is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the MODE button. The air conditioner runs in AUTO mode. N NNNNo oooot tttte eeee You can change modes at any time. 3 To adjust the standard temperature (The air conditioner automatically set the standard temperature by the current room temperature.), press the TEMPERATURE buttons one or more times. SET TEMP. SET TEMP. -SET TEMP. SET TEMP. -2°C -1°C Standard temperature +1°C +2°C < When you feel hot > < When you feel chilly > N NNNNo oooot tttte eeee Auto Change Over Function (Only the Inverter Models) . In the Automatic mode, the air conditioner selects one of COOL, HEAT, DRY depending on the indoor and outdoor temperatures. If the air conditioner has not been operated for an hour, the air conditioner will take the current temperatures again and it will restart operating in the optimum mode. Cooling Your Room You must select the Cool mode if you wish to adjust the: . Cooling temperature . Fan speed when cooling 1 If necessary, press the (On/Off) button. Result: The 5 Way indicator on the indoor unit lights up. . The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. 2 If the is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the MODE button. The air conditioner runs in COOL mode. N NNNNo oooot tttte eeee You can change modes at any time. 3 To adjust the temperature, press the TEMPERATURE buttons one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive. Result: Each time you press the TEMPERATURE buttons: -The temperature is adjusted by 1°C -The indoor unit beeps . The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature; the fan will, however, operate. 4 Select the fan speed by pressing the FAN button one or more times until the required setting is displayed: Automatic (rotated : ) Low Medium High Result: Each time you press the FAN button, the indoor unit beeps. E-11 ENGLISH 5 To control the direction of the air flow, refer to page 16 and 17. E-12 Heating Your Room You must select the Heat mode if you wish to adjust the: . Heating temperature . Fan speed when heating 1 If necessary, press the (On/Off) button....

Эта инструкция также подходит к моделям:
Кондиционеры - AQ07A1ME (1.31 mb)
Кондиционеры - AQ07A2ME (1.31 mb)
Кондиционеры - AQ07A3ME (1.31 mb)
Кондиционеры - AQ07A4ME (1.31 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории