Оценок - 3, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
CoolYou can adjust the desired temperature by 1°C within the range of 16°C~30°C. DryYou can adjust the desired temperature by 1°C within the range of 18°C~30°C. FanTemperature adjustment is not possible. HeatYou can adjust the desired temperature by 1°C within the range of 16°C~30°C. • Air flow can be adjusted manually.(see page 12 for instructions.) Adjusting the air flow direction Air flow can be directed to your desired position. Vertical air flow Air flow blades move up and down. Press the Air swing button on the remote controller. . Air swing indicator will be on and air flow blades move up and down continuously to circulate the air. . Press the Air swing button on the remote controller again, to keep the air flow direction in a constant position. Horizontal air flow Make sure one of the blade pin lever that stick out of the air flow blades are not broken. Move the blade pin lever left or right to keep the air flow direction in a constant position you prefer. • Be extremely careful with your fingers while adjusting the Horizontal air flow direction. There is a potential risk of personal injury when the unit is mishandled. Blade pin lever Using the Turbo function Turbo function will be helpful to cool your room quickly and effectively. Press the Turbo button on the remote controller during Cool mode. . Turbo indicator appears on the remote controller display and the air conditioner operates in Turbo function for 30 minutes. Cancel Press the Turbo button once again. • Turbo function is only available in Cool mode. • If you press the Mode button while the Turbo function is on, it will cancel the function. • Temperature/Fan speed cannot be adjusted while using this function. mode For a comfortable sleep, the air conditioner will operate it Fall asleep . Sound sleep . Wake up from mode. When the air conditioner is on and in cool/heat mode 1. Press the button on the remote controller. . indicator appears and Off timer indicator starts blinking on the remote controller display. 2. Press the Time Up or Time Down button to set the time. . You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from 3 hours ~ 12 hours. . Operating hour can be set from minimum 30 minutes to maximum 12 hours. . Default operation hour is set to 8 hours. 3. Press the Set button to active it on. . Off timer indicator stops blinking and reserved time will be displayed for 3 seconds. Then the air conditioner operates in good’sleep(Cool) mode. . If you don’t press Set button within 10 seconds after pressing the or Time Up or Time Down button, the air conditioner will return to previous status. Check Off timer indicator and (..T..) (..U..)indicator on the indoor unit. Press the Cancel button once again. Cancel You can set the desired temperature by 1.C in the range of 16.C~30.C. Fan speed will be adjusted automatically according to the mode. Air flow direction will be adjusted automatically according to the mode. Temperature and fan speed changes in mode • Fall asleep: Eases you into sleep by dropping the temperature. • Sound sleep: Relaxes your body and raises your temperature slightly. • Wake up from mode: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed. • Set Off timer in mode over 5 hours. You fell disturbed sleep if the is set too short or long because the default is set to 8-hour-operation. • If the mode is set less than 4 hours, the operation will stop at the same time. If the mode is set over 5 hours, it will run as Wake up stage from the last one hour before it stops. • Recommended set temperature is between 25.C~27.C for cooling and 21.C~23.C for heating. Setting the On/Off timer You can set the air conditioner to turn on/off automatically at desired time. Setting On timer while the air conditioner is off / Off timer while the air conditioner is on 1. Press the On Timer/Off Timer button. . On/Off timer indicator will blink on the remote controller display. 2. Press the Time Up or Time Down button to set the time. . You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from 3 hours ~ 24 hours. . Operating hour can be set from minimum 30 minutes to maximum 24 hours. 3. Press the Set button to active it on. . On timer indicator stops blinking and reserved time will be displayed for 3 seconds. . If you don’t press Set button within 10 seconds after selecting the time the air conditioner will return to previous status. Check On timer or Off timer indicator and indicator on the indoor unit. Setting On timer Setting Off timer Press the Cancel button. Cancel Additional options available in On timer mode You can select from Auto/Cool/Dry/Fan/Heat. You can adjust the fan speed in Cool/Fan/Heat mode. You can adjust the temperature in Auto/Cool/Dry/Heat mode. • Only the latest setting timer will be applied between the On Timer/Off Timer and Off timer functions. • After setting the timer, the set time will be displayed for 3 seconds before it disappe...
Эта инструкция также подходит к моделям:Кондиционеры - AQ09TSBNEUR (4.68 mb)
Кондиционеры - AQ09TSBXEUR (4.68 mb)
Кондиционеры - AQ09UGFN (4.68 mb)
Кондиционеры - AQ12TSBN (4.68 mb)