Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
When the outdoor ambient air temperature falls, the heating capacity of the unit might be reduced. • Defrosting Operation Depend on the outdoor temperature, the operation occasionally stops to melt the frost on the outdoor unit. FAN – Air Circulation Operation (for Cooling Model only) • Heated air rises and collects at the top of the room. The air circulation circulates the heated air downward, thus increasing heating effectiveness. When the unit is installed floor mounted, you should set the temperature higher than that of ceiling mounted. At ceiling mounted At floor mounted 1 36 OFF/ON TEMP MODE FANSPEE AUTO TIMER AIRSWING RESET AUTOCOOL FAN FANPEED DRY SLEEP 32145SELECTSET/CANCEL A B CONVENIENCE OPERATION Sleep Mode Operation To obtain a comfortable room temperature while sleeping:• Press 5. • Sleep mode indicator on the indoor unit will light up. • To cancel this operation, press once more. Sleep Mode Operation Details • When the room temperature reaches the set temperature, the airflow volume will change to low automatically. • Sleep Mode Operation time is 8 hours. • When used together with the timer, the timer has a priority. Cooling Model CARE AND MAINTENANCE Cleaning the Indoor Unit and Remote Control • Wipe gently with a soft, dry cloth. • Do not use water hotter than 40°C or polishing fluid to clean the unit. Cleaning the Air Filter (Recommendation:- If the unit is operated in a dusty environment, clean the filters every two weeks, continuous use of this dirty filters will reduce cooling or heating efficiency) 1 Remove dirt using a vacuum cleaner. 2 Wash back of the air filter with water. 3 If badly soiled, wash it with soap or a mild household detergent. 4 Let it dry and reinstall it. Be sure the “FRONT” mark is facing you. *Damaged air filter. Consult the nearest authorized dealer. Part No.: CWD001088. • Do not use benzene, thinner, scouring powder or clothes soaked in caustic chemical to clean the unit. H OFF H ON SETTING THE TIMER • Press the Timer Selection Button 1. • Timer indicator on the indoor unit will light up. • Select one of the following five types of operation. Each time the button is pressed, the operation mode is shifted in the arrow direction. Delay OFF Timer Example : Operation Stops after 1 hour ON Timer. Delay ON Timer Example : Operation starts after 6 hours. Delay OFF and Example : ON Timer Operation stops after 1 hour and re-starts after another 5 hours. Delay ON and Example : OFF Timer Operation starts after 10 hours, and then stops after another 8 hours. • Then press the Timer Setting Button 2 or 3 to the desired number of hours. (Number of hours which can be set : 1 ~ 12) • Press the Timer Set/Cancel Button 4. Heat Pump Model Sleep shift operation starts. Approx. 3°C decrease. • Cooling or Soft Dry Operation for sleep shift operation will start to avoid overcooling. • Heating operation for sleep shift operation will start to avoid overheating. Sleep Operation button is pressed. 0~1 hour Approx. 2°C decrease. Approx. 0.5°C increase. Approx. 0.5°C increase. Temperature S e t t i n g T e m p e r a t u r e Time < 1 hour > after approx. 8 hours of sleep shift operation, it will stop automatically. Time Approx. 0.5°C increase. Temperature Sleep Operation button is pressed. Sleep shift operation starts. 0~1 hour < 1 hour > after approx. 8 hours of sleep shift operation, it will stop automatically. Approx. 0.5°C increase. • Cooling or Soft Dry Operation for sleep shift operation will start to avoid overcooling. S e t t i n g T e m p e r a t u r e OFF/ON TEMP MODE FANSPEE AUTO TIMER AIRSWING RESET AUTOCOOL FAN FANPEED DRY SLEEP 32145SELECTSET/CANCEL A B CONVENIENCE OPERATION Sleep Mode Operation To obtain a comfortable room temperature while sleeping:• Press 5. • Sleep mode indicator on the indoor unit will light up. • To cancel this operation, press once more. Sleep Mode Operation Details • When the room temperature reaches the set temperature, the airflow volume will change to low automatically. • Sleep Mode Operation time is 8 hours. • When used together with the timer, the timer has a priority. Cooling Model CARE AND MAINTENANCE Cleaning the Indoor Unit and Remote Control • Wipe gently with a soft, dry cloth. • Do not use water hotter than 40°C or polishing fluid to clean the unit. Cleaning the Air Filter (Recommendation:- If the unit is operated in a dusty environment, clean the filters every two weeks, continuous use of this dirty filters will reduce cooling or heating efficiency) 1 Remove dirt using a vacuum cleaner. 2 Wash back of the air filter with water. 3 If badly soiled, wash it with soap or a mild household detergent. 4 Let it dry and reinstall it. Be sure the “FRONT” mark is facing you. *Damaged air filter. Consult the nearest authorized dealer. Part No.: CWD001088. • Do not use benzene, thinner, scouring powder or clothes soaked in caustic chemical to clean the unit. H OFF H ON SETTING THE TIMER • Press the Timer Selection Button 1. • Timer indicator on the indoo...
Эта инструкция также подходит к моделям:Кондиционеры - CS-A24CTP (1.49 mb)
Кондиционеры - CS-A12CTP (1.49 mb)