Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Ensure that the drainage piping is connected properly. Otherwise, water will leak out. Do not install the unit in a potentially explosive atmosphere. Gas leak near the unit could cause fire. Do not install, remove and reinstall the unit by yourself. Improper installation will cause leakage, electric shock or fire. Please engage an authorized dealer or specialist for the installation work. !Caution OFF OFF Operation Precautions !Warning This sign warns of death or serious injury. Do not share outlet. Do not insert plug to operate the unit. Do not pull out plug to stop the unit. Do not operate with wet hands. Do not damage or modify the power cord. Do not insert finger or other objects into the indoor or outdoor units. Do not expose directly to cold air for a long period. Plug in properly. Use specified power cord. If abnormal condition (burnt smell, etc.) occurs, switch off and unplug the power supply. !Caution This sign warns of injury. Do not pull the cord to disconnect the plug. Do not wash the unit with water. Do not use for other purposes such as preservation. Do not use any combustible equipment at airflow direction. Do not sit or place anything on the indoor or outdoor unit. Switch off the power supply before cleaning. Ventilate the room regularly. Pay attention as to whether the installation rack is damaged after long period of usage. Switch off the power supply if the unit is not used for a long period. SAFETY PRECAUTIONS Before operating, please read the following “Safety Precautions” carefully. To prevent personal injury, injury to others and property damage, the following instructions must be followed. Incorrect operation due to failure to follow instructions will cause harm or damage, the seriousness of which is classified as follow: !Warning This sign warns of death or serious injury. !Caution This sign warns of damage to property. The instructions to be followed are classified by the following symbols: This symbol (with a white background) denotes an action that is PROHIBITED. These symbols (with a black background) denote actions that are COMPULSORY. OFF NAME OF EACH PART Indoor Unit 1Air Outlet Vent 2Power Supply Cord 3Air Intake Vent 4Air Filters (behind the panel) 5Horizontal Airflow Direction Louver (manually adjusted) 6Vertical Airflow Direction Louver Indoor Unit Controls 1Operation Indication Lamps 2Signal Receptor 1Auto Operation Button 2Power Mode Indicator – GREEN 3Timer Mode Indicator – ORANGE 4Sleep Mode Indicator – ORANGE 5Air Swing Mode Indicator – ORANGE Outdoor Unit Accessories Remote Control Remote Control Indication Sticker Remote Control Holder Two RO3 (AAA) dry-cell batteries or equivalent OFF/ N EMP MODE FANSPEED AUTO TIMER AIRSWING RESET SLEEP MANUAL SELECTSET/CANCEL A B ATAUTO OCOOLRDR ANSPEEDH HA B AUTO OFF/ON POWER TIMER SLEEP AIR SWING 1234512341231652CU-V18CTP5, CU-V24CTP5 CU-A18CTP5, CU-A24CTP5 1Air Intake Vents 2Piping 3Connecting Cable 4Air Outlet Vents 5Drain Hose 45CU-V12CTP5 CU-A12CTP5 35 CS-A12CTP CU-A12CTP5 / CS-A18CTP CU-A18CTP5 / CS-A24CTP CU-A24CTP5 NAME OF EACH PART Remote Control Remote Control Signal. • Make sure it is not obstructed. • Maximum distance : 10 m. • Signal received sound. One short beep or one long beep. Notes for Remote Control. • Do not throw or drop. • Do not get it wet. • Certain type of fluorescent lamps may affect signal reception. Consult your dealer. Do not place the remote control in a location exposed to direct sunlight, or next to a heating unit, or other heat source. How to Insert the Batteries 1 Gently press the place marked OPEN and slide the cover towards you. 2 Insert the batteries – Be sure the direction is correct. About the batteries • Can be used for approximately one year. Observe the following when replacing the batteries • Replace with new batteries of the same type. • Do not use rechargeable batteries (Ni-Cd). • Remove the batteries if the unit is not going to be used for a long period. Proper way to operate the remote control in the case of ceiling/wall mounting. • Operate the remote control in parallel with the floor. (See the figure below) 1Signal Transmitter 2Operation Display 3Room Temperature Setting Button (Illuminating button) 4Operation Mode Selection Button 5Sleep Mode Operation Button (Illuminating button) 6 Timer Setting Button 7Timer Selection Button 8OFF/ON Button (Illuminating button) 9Fan Speed Selection Button 0Auto Airflow Direction Button !Timer Set/Cancel Button @ Manual Airflow Direction Selection Button #Reset Point (Press with fine-tipped object to clear the memory) Cooling Model Heat Pump Model HH • The signal changes as shown in the figure below. It means that the receiving conditions are bad and the signal can not be controlled properly. O.K. OUT(Fig. 2) (Fig. 1) Horizontal Level HOW TO OPERATE To start the operation • Press 1. • POWER indicator (green) on the indoor unit will light up. • To stop, press once more. Setting Mode • Press 2 to select:Cooling Model AUTO – Automatic Operatio...
Эта инструкция также подходит к моделям:Кондиционеры - CS-A24CTP (1.49 mb)
Кондиционеры - CS-A18CTP (1.49 mb)