Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
2) Install the Flexible Exhaust Hose and the Adjustable Window Slider Kit as depicted in Fig.5 & Fig.5a Fig.5a Fig.5 NOTE: Step 2 is required only while using the cooling mode 3) Plug the unit into a 115V~60Hz grounded electrical outlet. 4) Make sure the water pump drain hose is correctly installed. .. 5) Press the on / off button to turn on the unit. Water pump drain hose Fig.6 1 BEFORE USE Dehumidifying and Cooling Operations O OOO - The operating range for cooling operating is 17 C-30 C/63 F-86 F. - If the cooling or dehumidifying operations have been switched off and need switching on again in a short time, allow approximately three minutes for the cooling or dehumidifying operations to resume. -Make sure the water pump drain hose is correctly connected to the unit. Power supply: - Insert the AC Power Plug to a AC socket. - Do not connect the air conditioner to a multiple socket outlet which is also being used for other electrical appliance. - Be sure the power supply is AC 115V~ 60Hz. O OOO 2 COOLING OPERATION (Operating temperature range: 17 C-32 C/63 F-90 F) - Press the "MODE" button several times until the "COOL" indicator light comes on. -Press the "TEMP SETTING" buttons "" or "" to select your desired room temperature. O OOO (17 C-30 C/63 F-86 F) - Press the "FAN SPEED" button to choose the fan speed. O OOO 3 DEHUMIDIFYING OPERATION (Operating temperature range: 13 C-32 C/55 F-90 F) - Press the "MODE" button several times until the "DRY" indicator light comes on. - The fan will run at a fixed speed at this setting. - Keep windows and doors closed for the best dehumidifying effect. - Do not put the duct to window. 4 HEATING OPERATION (Cooling only type without heat feature) O OOO (Operating temperature range:5 C-30 C/41 F-86 F) - Press the "MODE" button several times until the "HEAT" indicator light comes on. -Press the "TEMP SETTING" buttons "" or "" to select your desired room temperature. O OOO (17 C-30 C/63 F-86 F) - Press the "FAN SPEED" button to choose the fan speed. - Do not put the duct to window. 5 FAN OPERATION - Press the "MODE" button several times until the "FAN " indicator light comes on. - Press the "FAN SPEED" button to choose the fan speed. - Do not put the duct to window. 6 TIMER OPERATION Setting the on timer: - Press the "TIMER ON" button when the air conditioner is off. Select the time you need the unit start to operate. - The Operation Paned Window will display "ON" -The starting time is adjustable from 0.00 to 24. Setting the off timer: - Press the "TIMER OFF" button when the air conditioner is on. Select the time you need the unit turn off. The Operation Panel Window will display "OFF". - The turning off time is adjustable from 0.00 to 24. 7 WATER PUMP DRAINAGE - Connect the water pump drain hose to the unit before operate. When the water level of the internal water tank reaches a predetermined level, the water pump will be activated and drain the condensed water outside through the connected drain hose. The maxi...
Эта инструкция также подходит к моделям:Кондиционеры - DOC-091R (1.56 mb)
Кондиционеры - DOC-091R (1.56 mb)
Кондиционеры - DOC-091RH (1.56 mb)
Кондиционеры - DOC-091R (1.56 mb)