Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
We hope you enjoy this stylish and practical unit, which is designed for improving your living and working comfort. Please read this manual carefully before using this product. The following tips may help to maximize the efficiency of your air conditioner: • When the air conditioner is on, keep doors and windows closed. • Turn off kitchen or bathroom exhaust fans when your air conditioner is on. • Operate the unit in recommended room size. 107 sq.ft.(15 sq.m) for 5,000 BTU • Turn off the air conditioner when you leave home. • Check the filter monthly and keep it clearn. • Do not place anything that may gnereate heat near the thermostat or the air conditioner may run longer then necessary. • Keep blinds and curtains closed during hot weather. • Avoid blocking the air vents. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE - 2- IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed: 1. Read all instructions 2. To protect against fire, electric shock and personal injury, do not immerse cord, plugs, or the unit in water or other liquid. 3. Close supervision is necessary when the product is used around the chirldren. This product is not intended for use by chirdren. 4. Do not operate the product with a damaged cord/plug. If the plug is damged in any manner, please return the product for repair. 5. Always keep the product in an upright position. 6. During the transit, the product could be placed up side donwn, which may cause the oil in the compressor drain into the refrigerant tubes reducing the cooling efficiency. Thus, before using the product, keep the product in a upright position for 1~2 hours. 7. Connect the product to a properly grounded power supply. Do not use an adapter plug or extension cord. 8. Do not cover or insert any object into the air inlet and/or outlet. 9. Turn off the power when no one is in the room. 10. Do not place anything in the direct path of the airflow. 11. Do not place the product near any heat source or where gas leakage may occur. 12. Do not use the product near a bath, shower, or swimming pool, or in any other steamy, or wet areas. 13. Do not turn off/on the product by plugging or unplugging the power cord directly. 14. Do not modify the power cord or share the outlet with other appliances. 15. Unplug the product from the outlet when not in use and before cleaning. 16. Attachments not recommended by the manufacturer as they may cause injuries. 17. Do not expose skin, face and eyes directly to cool air for a long period of time. 18. If an abnormal odor or smoke comes from the product, disconnect the unit immediately and bring to a qualified service technician. 19. Unplug the power from wall outlet before cleaning the filter and do not touch the metal parts inside. 20. Do not apply any kind of insecticide or flammable spray onto or into the unit. 21. Do not step on the product or place objects on the unit. 22. Place the product on a steady and flat surface, or the water may slip out of the water tank. 23. Before storing the product, always drain the water from the unit and clean the filter. 24. Do not use the product for other than it’s intended use. The manufacturer disclaims any responsibility if the above instructions are not followed. The manufacturer reserves the right to make technical changes without notice. SAVE THESE INSTRUCTIONS This product is designed for household use only -3- LCDI POWER CORD AND PLUG LCDI POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug. The LCDI power cord and plug will shut off the supply source via electrical disconnect (circuit trip) if the nominal current leakage between the cord shield and either load conductor exceeds a predetermined value. The cord will not be able to conduct power until the devise has been manually reset. This device provides protection to reduce the risk of fire due to arcing faults in the power cord. The cord shields are not grounded and they must be considered as shock hazards if exposed. The cord shield must not be connected to ground or to any exposed metal. To ensure if the plug is working properly, please follow the following instructions to test it: 1. Plug power cord into wall outlet. 2. Press TEST button. The circuit should trip, cutting power to the air conditioner. 3. Press RESET button for use. DO NOT USE IF ABOVE TEST FAILS. In the event the LCDI Plug of the power cord trips by itself, then first examine the cord for any damage. If there is no damage to the cord, then press the RESET Button. If the LCDI Plug trips again, then immediately unplug the power supply cord and contact a professional technician or service center. WARNING: 1. Do not use the TEST and RESET buttons as “ON” and “OFF” switches. 2. Do not press the TEST button while the air conditioner is operating 3. The cord and plug are designed for indoor use only. 4. Periodically examine the cord for any da...