Оценок - , средний балл: ( )

Инструкция по эксплуатации Encore electronic, модель ENNUS1

Производитель: Encore electronic
Размер: 1.02 mb
Название файла: e632c85e-5a8b-489f-8874-fa63cdcc0fe0.pdf

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

3.2.2 IP Address Unless you are assigning an IP address using DHCP, you must obtain an unused IP address from your network administrator. 3.2.3 Methods for Setting the IP Address You can set the IP address of your ENNUS1 Server using one of the following methods, depending on your network operating environment: .. Automatic IP Address Assignment .. Manual IP Address Assignment 3.2.4 Server Names and Server Name Rules The default server name of the Server is “ENNUS1”. If you have multiple Servers in your local area network, to avoid using the same server names you have to change the server names by using the Control Center. If your server name is longer than 15 characters, the Server uses only the first 15 characters. 3.2.5 Setting the IP Address 1. Install the Control Center. The Control Center is available on the Product CD. 2. Start the Control Center and Auto-searching Server window will appear. 3. If the tool finds multiple Servers in your local area network, then you have to select one Server from the Server List. 4. Double click the highlighted ENNUS1 server to enter the main web page. 5. Click the “CONFIG” button and enter the ENNUS1 Server’s administrator (default: admin) and password (default: admin). 6. After you login successfully, the “general setting” web page appears. 7. Click the button corresponding to your choice of IP setting method (static or dynamic using DHCP). When assigning a static IP address you also have to define Subnet Mask and Default Gateway. If you choose Automatically get IP by DHCP, you can use desired DNS by clicking the Manual DNS button and manually assigning a DNS. 8. Click Submit to save your settings. And the ENNUS1 Server will reboot. 9. You have now finished configuring the IP address. Chapter4 Using the ENNUS1 Server 4.1 Introduction The goal of this product is to provide connectivity to USB devices from a single server. A new technology, “NetUSB”, has been developed to achieve this goal. “NetUSB” is a “USB over IP” technology that transparently redirects all USB packets to a TCP/IP network channel. “NetUSB” allows you to use remote USB devices as if they are connected directly to your PC. 4.2 Connect & Disconnect “NetUSB” allows you to use remote USB devices as if they are connected directly to your PC. The “connect” operation is a software operation that simulates an actual USB device plug-in. That is to say, when you do a “connect” operation in the Control Center, PC can then detect a USB device’s plug-in, although actually you do not plug in any USB device. Similarly, the “disconnect” operation is a software operation that simulates the disconnection of the USB device. Once the connect operation is successful, the operations to use that USB device are just the same as if the USB device is directly connected to the PC. If a USB device is “connected” by a PC, we say that PC has the ownership of the USB device. Only one PC can get the ownership of a USB device at the same time. Therefore, if a USB device is connected by one PC, no other PC can connect this USB device until this USB device is disconnected. 4.3 Subnet Issue Before using the NetUSB technology, you must first make sure that your PC can access ENNUS1 server via TCP/IP. The simplest way to do this is using “Control Center” to search for ENNUS1 server on the network and change its IP address to be the same subnet as your PC. If the ENNUS1 server and your PC are not in the same TCP/IP subnet, Control Center will show the ENNUS1 server in green, as in the following figure. 1. You must change the IP address (or using DHCP) of the ENNUS1 server so that the ENNUS1 server and your PC are in the same subnet. To do this, please double-click on the ENNUS1 server, and the following window will appear. Change the IP setting to make ENNUS1 server and your PC within the same subnet. After automatic reboot, Control Center will show the ENNUS1 server in blue, meaning you can access these servers by the NetUSB technology. 4.4 Installation of USB Device Driver Some USB devices, like printers or MFPs (multifunction printers), require installing vendor-supplied driver (usually on vendor’s CDROM). For those USB devices that do not require drivers, please skip this section. A. Insert vendor’s CDROM into the CD drive and run the “autorun” program. B. Follow the instructions of the installation program to install driver. 1 192.168.1.100 C. When the installation program asks you to plug-in the USB device, run the “Control Center”. D. In the Control Center, click the ENNUS1 server that has the desired USB device attached. E. Click the desired USB device as in the following figure. F. Click the “Connect” button. Then the message “Manually Connect by your_computer_name” will appear, as in the following figure. G. Now, the installation program will detect the USB device and continue to install the driver. H. After the installation is complete, click the USB device in the Control Center and then click the “Disconnect” button to disc...