Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
2. See “Removing the Lower Cover” on page 56. 3. Remove the one screw (B) securing the hard disk drive module. Step Size (Quantity) Color Torque 1 M2 x L4 (1) Silver 1.6 kgf-cm 64 Chapter 3 4. Slide the hard disk drive module away from the connector. 5. Lift the hard disk drive module and remove it from the hard disk drive bay. NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it. Chapter 3 65 6. Remove the four screws (D) securing the hard disk to the bracket and remove the hard disk from the bracket. Step Size (Quantity) Color Torque 1~4 M3 x L3 (4) Silver 3.0 kgf-cm Removing the Hard Disk Drive Module 2 1. See “Removing the Battery Pack” on page 54. 66 Chapter 3 2. Remove the two captive screws securing the hard disk drive cover. Chapter 3 67 3. Remove the one screw (B) securing the hard disk drive module. Step Size (Quantity) Color Torque 1 M2 x L4 (1) Silver 1.6 kgf-cm 4. Slide the hard disk drive module away from the connector. 68 Chapter 3 5. Lift the hard disk drive module and remove it from the hard disk drive bay. NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it. 6. Follow the step 6 of “Removing the Hard Disk Drive Module 1” on page 64 to remove the hard disk from the bracket. Removing the Optical Drive Module 1. See “Removing the Battery Pack” on page 54. 2. See “Removing the Lower Cover” on page 56. 3. Remove the one screw (B) securing the optical drive module to the system. Step Size (Quantity) Color Torque 1 M2 x L4 (1) Silver 1.6 kgf-cm Chapter 3 69 4. Use a screw driver to push out the locker bracket of the optical drive module. 5. Slowly pull out the odd module from the odd drive bay. 70 Chapter 3 6. Remove the one screw (B) securing the locker bracket and remove the locker bracket from the optical disk drive module. Step Size (Quantity) Color Torque 1 M2 x L4 (1) Silver 1.6 kgf-cm Chapter 3 71 Main Unit Disassembly Process Main Unit Disassembly Flowchart MAIN UNIT DISASSEMBLY B x 1 MAIN UNIT KEYBOARD MAIN BOARD Bx1 LCD MODULE Ax4 UPPER CASE Ax 16 CPU THERMAL MODULE CPU SCREW X 8 Bx1 MIDDLE COVER E-KEY BOARD FINGERPRINT MODULE B x 2 TOUCHPAD MODULE B x 2 VGA CARD B x 2 MODEM CARD B x 2 Bx3 POWER BOARD B x 2 SUBWOOFER SPEAKER MODULE USB MODULE Screw List Item Screw Color Part No. A M2 x L4 Black 86.00E34.738 B M2 x L4 Silver 86.9A552.4R0 72 Chapter 3 Removing the Middle Cover 1. See “Removing the Battery Pack” on page 54. 2. Use a plastic screw driver to pry loose the side of the middle cover. 3. Carefully pry loose the middle cover from the latches securing it and remove the middle cover. Chapter 3 73 Removing the Keyboard 1. See “Removing the Battery Pack” on page 54. 2. See “Removing the Middle Cover” on page 73. 3. Push up on the four latches securing the keyboard to the upper case. 4. Carefully pry loose the keyboard and turn it over on the touchpad area. 74 Chapter 3 5. Disconnect the keyboard cable from the main board to remove the keyboard. Removing the Power Board 1. See “Removing the Battery Pack” on page 54. 2. See “Removing the Middle Cover” on page 73. Chapter 3 75 3. Remove the one screw (B) securing the power board to the upper case. Step Size (Quantity) Color Torque 1 M2 x L4 (1) Silver 1.6 kgf-cm 4. Release the power board from the latch and turn it over. 76 Chapter 3 5. Disconnect the power board cable from PWCN1 connector on the system to remove it. Chapter 3 77 Removing the Heatsink Module NOTE: There are two version of heatsink module. For this section, we are going to use the discrete model. The UMA version looks like the picture below: 1. See “Removing the Battery Pack” on page 54. 2. See “Removing the Lower Cover” on page 56. 3. Disconnect the heatsink connector from the main board. 78 Chapter 3 4. Remove the eight screws securing the heatsink module in the order shown. NOTE: The green VGA board in Aspire 8730/8730Z Series is made by NVdia, while the red VGA board in Aspire 8530 Series is made by ATI. 5. Carefully lift up the heatsink module. Chapter 3 79 Removing the CPU NOTE: Aspire 8730/8730Z Series uses the Intel® processor, while Aspire 8530 Series uses the AMD® processor. But the process in removing the CPU are the same for all the models. 1. See “Removing the Battery Pack” on page 54. 2. See “Removing the Lower Cover” on page 56. 3. See “Removing the Heatsink Module” on page 78. 4. Using a flat screwdriver, turn the CPU socket latch counter-clockwise to release the CPU. 80 Chapter 3 5. Lift up carefully to remove the CPU. NOTE: When installing the CPU, make sure to install the CPU with PIN 1 at the corner as shown. Chapter 3 81 Removing the Discrete Board Module (For Discrete Models Only) NOTE: Aspire 8730/8730Z Series uses the NVdia board, while Aspire 8530 Series uses the ATI board. The process for removing the board are the same for models with discrete board module. 1. See “Removing the Battery Pack” on page 54. 2. See “Removing the Lower Cover” on page 56. 3. S...
Эта инструкция также подходит к моделям:Компьютеры - 8735G (10.95 mb)
Компьютеры - 8735ZG (10.95 mb)