Оценок - 2, средний балл: 4
(
)
)
|
Фото и характеристики Oregon Scientific EW98 |
Фрагмент инструкции
· Press it to silence the current alarm when it is going and enter the snooze mode for 8 minutes. 3.LCD display: · Displays time, indoor & outdoor temperature, date. 4.Ice alert indicator light: · Flashes when the outdoor temperature is between -2.0°C(28 °F) and 3.0°C(37 °F). 5.+/CHANNEL key: · Press it once to switch between Channel 1, 2 and 3. · Press and hold it for 2 seconds to view the channels automatically Press it again to exit the automatic display mode. · In time setting mode, press it to increase the setting values. 6.SET CLOCK key: · In normal time mode, press it once to enter the normal time setting mode. · In normal time setting mode, press it to step the setting items. Press and hold it to exit the setting mode in any step. 7.-/MIN.MAX. key: · Press it to show the minimum and maximum temperature records in the past 24 hours. · Press and hold it for 3 seconds to delete the minimum and maximum temperature records. · In time setting mode, press it to decrease the setting values. 8.DC jack: · Plug DC adaptor to power the clock. 9.ALARM ON/OFF key: · Press it once to turn on the backlight and display 3 1 2 4 56 7 8 10 11 9 12 19 13 14 16 18 17 15 the alarm time for 5 seconds. · Press it again to turn on/off the alarm. 10.SET ALARM key: · Press it once to turn on the backlight for 5 seconds, and press it again to enter the alarm time setting mode. · In alarm time setting mode, press it to step the setting items. 11.FOCUS turning knob: · Focus the projected image. 12.BATTERY COMPARTMENT: · Accommodates 2 AA size batteries. 13.RESET key: · Press it to return all values to default values. · In case of malfunction, the unit may be required to reset. 14.°C/°F slide switch: · Slide it to switch between Celsius and Fahrenheit. 15.SENSOR key: · Press it once to turn on the reception of transmitter signal (433 MHz). · During the reception period, press and hold it for 3 seconds to stop the reception. 16.PROJECTION ON/OFF slide switch: · Slide it to turn on/off the projector. 17.180° FLIP key: · Press it to rotate the projected image by 180°. 18.RCC key: · In normal time mode, press it once to receive the RC signal for reception testing. 19.BATTERY DOOR LCD DISPLAY 1. Time zone 2. Low battery indicator 3. Signal reception indicator 4. Indoor temperature 5. Channel 6. Sensor signal 7. Outdoor temperature 8. °C & °F 9. Alarm time & Date 10. Min and Max temperature 11. Time SENSOR 1.LED indicator: · Flashes when the remote unit sensor a reading. 2.Wall-mounting holder: · Supports the sensor on the wall. 3.RESET key: · Press it to restart the sensor and return all values to default values. 4.CHANNEL slide switch: · Assign the sensor to channel 1, 2 or 3. 5.BATTERY COMPARTMENT: · Accommodates 2 AAA size batteries. 6.BATTERY DOOR RECEPTION OF SENSOR SIGNAL OPERATING THE MAIN UNIT 1. Remove the battery door and insert 2 new AA size batteries as per the polarity information marked on the battery compartment. 2. Press “RESET” key to restart the clock. 3. Slide “°C/°F” switch to select between Celsius and Fahrenheit. 4. Slide the battery door back on. 5. Press “+/CHANNEL” key to select the desired channel. Note When the sensor signal is received, the icon “ ” will be displayed on the LCD. RECEPTION OF RADIO CONTROLLED TIME SIGNAL The time and calendar are radio-controlled. The current time and calendar are automatically synchronized with the atomic clock signal from Fort Collins, Colorado. When used for the first time (after inserting batteries or pressing “RESET” key), the clock will start to search for the atomic clock signal and the signal reception icon will flash for 5 minutes. SIGNAL RECEPTION INDICATOR The wave segment flashing means time signals are being received. The signal quality could be classified into 3 types: Note 1. The unit will automatically search for the time signal at 2:00am (3:00am or 4:00am is also available if the signal is not received at 2:00am), 8:00am, 2:00pm, and 20:00 each day. 2. Always place the unit away from electrical devices such as televisions, computers, telephones, etc. 3. Avoid placing the unit on or next to metal plates. 4. If possible, place the unit next to a window. Signal reception is greatly decreased when located in closed areas like basements or metal buildings. 5. Do not start reception in moving vehicles or trains. TIME AND CALENDAR MANUAL SETTING If you are out of reach of the Radio Controlled transmitter or if the reception is not reachable, the time and calendar can be set manually. As soon as the signal of transmitter is received again, the clock will automatically synchronize with the exact time and calendar. 1. In normal time mode, press “SET CLOCK” key once to enter the time setting mode. 2. Press “+/CHANNEL” or “-/MIN.MAX.” key to change the settings. 3. Press “SET CLOCK” to confirm. The setting order is: 12/24-hr format, time, time zone offset, year, day/month format, date. 4. Press “SET CLOCK” key to save and exit the setting mode. No signal Weak signal Exce...