Войти:
Оценок - 4, средний балл: 3.5 ( )

Инструкция по эксплуатации Lenmar Enterprises, модель GMBH

Производитель: Lenmar Enterprises
Размер: 1.39 mb
Название файла: 21523.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Step 11 The selected icon become flashing. Manu key System backs to Mode Selection Status and is ready to select: +/-key Section 1 or Section 2 or Section 4 or Section 5 or Section 6 18 Section 4: OSD Manu Adjustment Key to be pressed Menu Display Step 1 Example: Language Menu Key Language Step 2 Example: Language Menu Key Step 3 Example: Language 7. “OSD Manu icon” keeps flashing. 8. “Language” marked by indigo light 9. “OSD Manu icon” keeps flashing.. 10. Language table shows up. +/- key “OSD Manu icon” keeps flashing. Remark Manu pressed and Display: Language Selected by +/- key: OSD H-Position. OSD V-Position. OSD Timer. Exit Language Table: English. Germany. France. Spanish Italy * Presses “+ key” to select the language downward * Presses “- key” to select the language upward. 19 Step 4 Menu Key Language setting is completed. The system is ready for next selection Step 5 +/- key To select OSD H-Position Step 6 Manu Key Example: Language 6. “OSD Manu icon” keeps flashing. Example: OSD H-Position 3.“OSD Manu icon” keeps flashing. 4.“OSD H-position” Marked on Indigo light. Example: OSD H-Position 9. “OSD Manu icon” keeps flashing. 10. Adjusting Scale of 0~120 shows up. 20 Adjusting Range: OSD Position: H-Position: 0~120 V-position: 0~ 120 If selects: OSD V-Position. OSD Timer. Repeat step 3~ 5 to execute. Step 7 +/-key Step 8 Manu key OSD H-Position adjustment is completed. The system is ready for next selection. Step 9 +/-key To select Exit Example: OSD H-Position “OSD Manu icon” keeps flashing. Example: OSD H-Position “OSD Manu icon” keeps flashing. Example: Exit 7. “OSD Manu icon” keeps flashing. 8. “Exit” marked on indigo light. * Keeps presses “+ key”: Value in the Scale is increasing until 120 * Keeps presses “- key”: Value in the Scale is decreasing until 0 Release the key, the value will stop at the satisfied point. As for OSD Timer. Repeat step 5~ step 8. 21 Step 10 Example: Exit “OSD Manu icon” keeps flashing. Step 11 The selected icon become flashing. Manu key System backs to Mode Selection Status and is ready to select: Section 1 or Section 2 or Section 3 or Section 5 or Section 6 Example: Exit “OSD Manu icon” keeps flashing. Step 11 The selected icon become flashing. Manu key System backs to Mode Selection Status and is ready to select: Section 1 or Section 2 or Section 3 or Section 5 or Section 6 22 Section 5: Function Execution Key to be pressed Step 1 Menu Key Input Source Step 2 Menu Key Step 3 +/- key Menu Display Remark Example: Input Source Manu pressed and Display: Input Source. Selected by +/- key: Mode Option. Reset. Exit 9. “Misc icon” keeps flashing. 10.“Input Source” marked by indigo light. Example: Input Source 11. “Misc icon” keeps flashing.. 12. “DSUB/AV/S-VIDEO” shows up Example: Input Source “Misc icon” keeps flashing. Presses “+ key” to select one of the Input Source among DSUB, AV or S-VIDEO rightward. * Presses “- key” to select one of the Input Source among DSUB, AV, S-VIDEO leftward Step 4 Menu Key Input Source Selection is completed. The system is ready for next selection. Step 5 +/- key To select Mode Option Step 6 Manu Key Example: Input Source “Misc icon” keeps flashing. Example: Mode Option 5.“Misc icon” keeps flashing. 6.“Mode Option” Marked on Indigo light. Example: Mode Option 11. “Misc icon” keeps flashing. 12. MAC 768-75/VESA768-75 shows up. 24 If selects: Reset. Repeat step 3~ 5 to execute. Step 7 +/-key Step 8 Example: Mode Option “Misc icon” keeps flashing. Example: Mode Option * Presses “+ key” to select “MAC768-75.” * Presses “- key” to select “VESA768-75” Manu key “Misc icon” keeps flashing. Mode Option selection is completed. The system is ready for next selection Step 9 Example: Exit As for Reset Repeat step 5~step 8. +/-key To select Exit 9. “Misc icon” keeps flashing. 10. “Exit” marked on indigo light. 25 Step 10 Example: Exit “Misc icon” keeps flashing. Step 11 The selected icon become flashing. Manu key System backs to Mode Selection Status and is ready to select: +/-key Section 1 or Section 2 or Section 3 or Section 4 or Section 6 Example: Exit “Misc icon” keeps flashing. Step 11 The selected icon become flashing. Manu key System backs to Mode Selection Status and is ready to select: +/-key Section 1 or Section 2 or Section 3 or Section 4 or Section 6 26 Section 6: OSD Exit Key to be pressed Menu Display Remark Mode Selection: E x it Example: Exit 11.“Exit icon” keeps flashing. 12.Only “Exit” displayed on OSD. Step Menu Key OSD Disappeared 27 3.Specification Specification and Appendix: 3-1 Technical Specification: LCD Panel: 15.0” TFT, 0.297mm, TTL Viewing Angle -60~60 degree (H), -55~45 degree (V) Resolution: 1024 x 768 (XGA) 800 x 600 (SVGA) 640 x 480 (VGA) Display Colors: 16.7 M (8 bits/color) Pixel Pitch (mm): 0.297 (H) x 0.297 (V) Contrast Ration: 350:1 Brightness (cd/m2): 250nit Display Area (mm): 304.1 (H) x 228.1 (V) Power Supply: AC 90~264, 50~60Hz Universal Power management: VESA-DPMS 30W Max.; Power Down Mode: less than 3W User’s Contro...

Эта инструкция также подходит к моделям:
Компьютерные аксессуары - GMBH (1.39 mb)
Компьютерные аксессуары - GMBH (1.39 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории