Оценок - 2, средний балл: 3 ( )

Производитель: HP Размер: 1.39 mb Название файла: 21523.pdf Язык инструкции:

3. Resolution displayed Menu Key OSD Menu shows up. Press/Display: + key: 1st press + key: 2nd press + key: 3rd press + key: 4th press + key: 5th press Colour Adjusting Mode Image Adjusting Mode Function Executing Mode OSD Manu Mode Mics Selection Mode Exit Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Remark: (1) Reverse selection is available to make by “- key”. (2) Always get out from one mode to another by selecting “exit” and pressing “Manu key” to execute. 6 Section 1 : Colour Mode Adjustment Key to be pressed Menu Display Step 1 Example: Contrast Menu Key Contrast or Brightness/ Red/Green/ Blue by “+ key” Step 2 Example: Contrast Menu Key 1. “Colour icon” keeps flashing. 2. “Contrast” marked by indigo light. 3. Adjusting scale of 0~255 shows up. Step 3 Example: Contrast 1. “Colour icon” keeps flashing. 2. “Contrast” marked by indigo light. 1. “Colour icon” keeps flashing. 2. “Contrast” marked by indigo light. +/- key Magnitude Range Contrast: 0~255 Brightness: 0~216 Red Gain: 0~255 Green Gain: 0~255 Blue Gain: 0~255 * Keeps press the “+ key”: Value in the Scale is increasing until 255 * Keeps press the “- key”: Value in the Scale is decreasing until 0 Release the key, the value will stop at the satisfied point. Step 4 Menu Key The Contrast adjustment is completed. The system is ready for next selection Step 5 +/- key To select Brightness Step 6 Manu Key Example: Contrast 1. “Colour icon” keeps flashing. 2. “Contrast” marked by indigo light. Example: Brightness 1. “Colour icon” keeps flashing. 2. “Brightness” on indigo light. Example: Brightness 1. “Colour icon” keeps flashing. 2. “Brightness” on indigo light. 3. Adjusting scale of 0~216 shows up 8 If selects: Red, Green, Blue. Repeat step 3~ 5 to complete the adjustment. Step 7 Example: Brightness +/-key Step 8 Manu key Brightness adjustment is completed. The system is ready for next selection Example: Brightness 1. “Colour icon” keeps flashing. 2. “Brightness” on indigo light. Step 9 Example: Exit 1. “Colour icon” keeps flashing. 2. “Brightness” on indigo light. +/-key To select Exit 1. “Colour icon” keeps flashing. 2. “Exit” on indigo light. * Keeps press the “+ key”: Value in the Scale is increasing until 216 * Keeps press the “- key”: Value in the Scale is decreasing until 0 Release the key, the value will stop at the satisfied point. As for Red, Green, or Blue Gain adjustment: Repeat step 5~ Step 8. 9 Step 10 Example: Exit 1. “Colour icon” keeps flashing. Step 11 The selected icon become flashing. Manu key System backs to Mode Selection Status and is ready to select: +/-key Section 2 or Section 3 or Section 4 or Section 5 or Section 6 Example: Exit 1. “Colour icon” keeps flashing. Step 11 The selected icon become flashing. Manu key System backs to Mode Selection Status and is ready to select: +/-key Section 2 or Section 3 or Section 4 or Section 5 or Section 6 10 Section 2: Image Mode Adjustment Key to be pressed Step 1 Menu Key H-Position or V-Position/ Sharpness/ Phase/Clock by “+ key” Step 2 Menu Key Step 3 +/- key Menu Display Example: H-Position 3. “Image icon” keeps flashing. 4. “H-Posit.” marked by indigo light. Example: H-Position 4. “Image icon” keeps flashing. 5. “H-Posit.” marked by indigo light. 6. Adjusting scale of 0~146 shows up. Example: H-Position 3. “Image icon” keeps flashing. 4. “H-Posit.” marked by indigo light. Magnitude Range H-Position: 0~146 V-Position: 0~20 Sharpness: 1/2/3/4/5 Phase: 0~31 Clock: 0~127 * Keeps press the “+ key”: Value in the Scale is increasing until 146 * Keeps press the “- key”: Value in the Scale is decreasing until 0 Release the key, the value will stop at the satisfied point. 11 Step 4 Menu Key H-Position adjustment is completed. The system is ready for next selection Step 5 +/- key To select V-Position Step 6 Manu Key Example: H-Position 3. “Image icon” keeps flashing. 4. “H-Posit.” marked by indigo light. Example: V-Position 3. “Image icon” keeps flashing. 4. “V-Position” on indigo light. Example: V-Position 4. “Image icon” keeps flashing. 5. “V-Position” on indigo light. 6. Adjusting scale of 0~20 shows up 12 If selects: Sharpness, Phase, or Clock: Repeat step 3~ 5 to complete the adjustment. Step 7 Example: V-Position +/-key 3. “Image icon” keeps flashing. 4. “V-Position” on indigo light. Step 8 Manu key V-position adjustment is completed. The system is ready for next selection Example: V-Position 3. “Image icon” keeps flashing. 4. “V-Position” on indigo light. Step 9 Example: Exit +/-key * Keeps pressing “+ key”: Value in the Scale is increasing until 20 * Keeps pressing “- key”: Value in the Scale is decreasing until 0 Release the key, the value will stop at the satisfied point. As for Sharpness, Phase or Clock adjustment: Repeat step 5~ Step 8. To select Exit 3. “Image icon” keeps flashing. 4. “Exit” on indigo light. 13 Step 10 Example: Exit 1. “Image icon” keeps flashing. Step 11 The selected icon become flashing. Manu key System backs to Mode Selection Status and is ready to ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: