Оценок - 5, средний балл: 4.4
(
)
)
|
Фрагмент инструкции
Immerse the test stick in cold water for one second. Shake off the surplus water and determine the hardness by observing the pink-coloured area. Degree of hardness 0 very soft 1 soft 2 medium hard 3 hard 4 very hard Water hardness mol/m3 German hardness degree French hardness degree up to 0,7 up to 4. up to 7,2. up to 1,24 up to 7. up to 12,6. up to 2,5 up to 14. up to 25,2. up to 37,8. up to 3,7 up to 21. over 3,7 over 21. over 38. Test strip 1 Setting and memorising the water hardness You can set any one of 5 levels of hardness. Appliances are sent out from the factory set to hardness level 3. Plug in at the mains socket, but leave the appliance switched off. The setting of the hardness level is shown by the blinking of the “remove lime-scale” indicator: Press the key for about 3 seconds (1). Upon setting the hardness for the first time, the works setting of level 3 will be shown by the blinking of the “remove lime-scale” indicator and the glowing of the “1 cup normal”, “1 cup strong” and “2 cups” indicators. appliance indicator(s) Set the hardness level according to the previously determined degree by pressing the key the appropriate number of times (2). The hardness level which has been set will be shown by the number of the following which glow; “remove lime-scale”; “1 cup normal”; ”1 cup strong”; “2 cups”; “coffee-meal”. Example: hardness level 4 2 Hardness level 0 1 2 3 4 appliance Indicators Blink Glow 3 Save the hardness level in the memory by pressing the key (3). If no further hardness setting is made for a period of 30 seconds, the various indicators will cease to glow and the last memorized hardness setting will have been recorded. This memorised setting will remain unchanged even if there is an electricity supply failure. Setting the switch-off mechanism You can set the automatic switch-off period to 1 hour, 3 hours or 5 hours. Alternatively you can de-activate the automatic switch-off mechanism. Appliances are sent out from the factory set to 5 hours. Dependant upon the time period setting, the appliance will switch off automatically that period of time after the last preparation of coffee. The setting of the automatic switch-off will be shown by the alternate blinking of the “fill water tank”; “clean appliance” and the “empty spent coffee holder”; “remove lime-scale” indicators. 10 Plug in at the mains socket, but leave the appliance switched off. Press the key for about 3 seconds (4). Upon setting the switch-off period for the first time, the factory setting of 5 hours will be shown by the alternate blinking of the “fill water tank”; “clean appliance” and the “empty coffee grounds”; “remove lime-scale” indicators, together with the glowing of the “rinse”, “1 cup normal”, “1 cup strong”, “2 cups” and “coffeemeal” indicators. Set the switch-off period by pressing the key the appropriate number of times (5). The switch-off period which has been set will be shown by the glowing of the “rinse”, “1 cup normal”, “1 cup strong”, “2 cups” and “coffeemeal” indicators. Example: Switch-off period 3 hours. Switch-off period OFF 1hour 3hours 5hours appliance indicators Save the switch-off time in the memory by pressing the key (6). If no further switch-off period setting is made for a period of 30 seconds, the various indicators will cease to glow and the desired switch-off period setting will have been recorded. This memorised setting will remain unchanged even if there is an electricity supply failure. appliance indicator(s) alternate glowing blinking 4 5 6 appliance indicator(s) Preparing the appliance 7 8 Open the lid of the water tank and take out the water tank (7). Pour fresh, cold water into the water tank until the float in the tank has at least reached the upper position (8). Do not put hot water, mineral water or milk into the water tank. Replace the water tank, pressing it down firmly, so that the base valve opens. Shut the water tank lid. 9 If, when the appliance is switched on, the water tank is missing or further water should be added, the “fill water tank” indicator will glow and the preparation of espresso or coffee will be temporarily prevented. The “fill water tank” indicator will glow before the water tank is quite empty, which ensures, that the current espresso or coffee preparation can be completed and not broken off. Open the lid of the coffee-bean container. Put either espresso- or coffee-beans into the bean container (max 250 g) (9). Caution! Make sure that no foreign bodies, such as small stones amongst the coffee beans, get into the bean container. Any damages due to such foreign bodies getting into the coffee-mill are excluded from the guarantee. Close the lid. 12 Filling the heating system Place a receptacle underneath the steam nozzle Make sure that the knob for steam/hot water is at the position. Press the key for about one second (10). During the first usage, or when all the steam in the heating system has run out, the “ON/OFF” and “steam” indicators will ...