Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Some of the FR-1428 features are: No Air Time Fees and No License Required Up to 2 Mile Range Auto Battery Saver and Auto Squelch 14 Channel, 38 CTCSS Multifunction LCD Display Continuous Tone Coded Squelch System (CTCSS) Talk Confirmation Tone and Call / Ring Button Interchangeable Faceplates -3 PERFORMANCE Your transceiver will achieve its maximum operating range when communicating with other transceivers in a flat open area with no trees or buildings obstructing its signal. Range may be up to two miles under such conditions. Obstacles such as buildings, trees or mountains will tend to reduce the transceiver’s effective range. FCC WARNING Replacement or substitution of transistors, diodes or other parts of a unique nature, with parts other than those recommended by the manufacturer, may cause a violation of the technical regulations of Part 15 of FCC Rules. SAFETY INFORMATION Your wireless handheld portable transceiver contains a low power transmitter. When the PTT button is pushed it sends out radio frequency (RF) signals. The device is authorized to operate at a duty factor not to exceed 50%. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless devices. Important: To maintain compliance with the FCC’ s RF exposure guidelines hold the transmitter at least 1 inch (2.5 centimeters) from your face and speak in a normal voice, with the antenna pointed up and away. If you wear the handset on your body while using the headset accessory, use only the Audiovox supplied belt clip for this product and ensure that the antenna is at least 1 inch (2.5 centimeters) from your body when transmitting. Use only the supplied antenna. Unauthorized antennas, modifications, or attachments could damage the transmitter and may violate FCC regulations. Normal Position: Hold the transmitter approximately 1” from your face and speak in a normal voice, with the antenna pointed up and away. -4 FUNCTION AND LOCATION OF THE CONTROLS 1 2 3 4 5 13 12 6 7 8 9 10 11 -5 1. Push-to-Talk Button (PTT): Press to transmit. Release to receive. 2. Monitor Button (M): Press and hold to bypass the squelch and listen to channel activity. 3. Up Button ( ): Press this button to increase the volume or channel setting. 4. Function Select Button (F): Press this button to select or scroll through all unit functions. 5. Built-In Speaker 6. LCD Display: Displays the current FRS channel number as well as other functions. 7. Power Button ( ): Press and hold this button for 2 seconds to turn the transceiver on or off. 8. Call Button (CALL): Press and hold this button to send a ringing sound to other radios tuned to the same channel. 9. Down Button ( ): Press this button to decrease the volume or channel setting. 10. Built-In Microphone 11. Snap-On Faceplate 12. Speaker Jack: For use with an Audiovox approved headset accessory only. 13. Antenna -6 LCD DISPLAY AND OPERATION 6 12 13 1 2 3 4 5 7891011 1. Scan Indicator: This function allows the user to scan a channel to search for a valid signal. 2. Dual Watch Indicator: Icon appears when dual watch mode is active. Icon disappears when the function is disabled. 3. Voice Activated Transmission (VOX) Indicator: This function allows hands-free conversation. The icon appears when the VOX mode is activated. 4. Roger Beep Tone Indicator: Icon appears when the roger beep tone is enabled, signifying transmission has been terminated. Icon disappears when tone is disabled. 5. Beep Key Tone Indicator: This icon appears when the beep key tone is on, and disappears when tone is not in use. 6. Small Segment Display: Displays the CTCSS tone option from 01-38) for the FRS channel in use. -7 7. Receive/Transmit (RX/TX) Indicator: During receive, the left light ning symbol of this icon appears, together with the BUSY indication. During transmission, the right lightning symbol of this icon appears. 8. Busy Indicator: During signal reception or while in the monitor mode, this indication appears on the display, together with the RX lightning indication. 9. Call Indicator: This icon appears, together with the right lightning symbol, when the CALL button is pressed to indicate initiation of a call transmission. 10. Power Save Indicator: This icon appears to indicate the unit is in the power save mode to conserve battery power; it appears 5 seconds after the standby mode is activated. 11. Key Lock Indicator: This icon appears when the unit is placed in the key lock mode, to lock out all unit controls, except Power On/ Off, Backlight, Call and PTT. 12. Battery Level Indicator: This icon indicates the battery charge level on a scale of 1 to 3. 13. Large Segment Display: Indicates the FRS channel number in use. BATTERY INSTALLATION BELT CLIP IN RETRACTED BELT CLIP POSITION BATTERY COVER BATTERY POSITION COVER WITH COVER LATCH REMOVED -8- Your FR-1428 requires four “AAA” cells. Alkaline batteries will provide the best performance from your transceiver. CAUTION: ...
Эта инструкция также подходит к моделям:Радиоприемники - FR1428 (87.81 kb)