Войти:
Оценок - 1, средний балл: 3 ( )

Инструкция по эксплуатации AEG, модель KF 1050

Производитель: AEG
Размер: 737.53 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


10). 2. Inserting filter paper To open the filter, reach with yourfinger-tips into the slot and swing thefilter outwards (Fig.5). Insert a paper filter, size 4, into the filter funnel. Please fold the side and bottom fins of the filter paper inwards first. 3. Filling the ground coffee (Fig. 6) Please use medium-grade ground coffee. The quantity of coffee you use is a matter of your personal taste. One measure (about 6 or 7 grammes) per cup will produce coffee of medium strength (by German standards). Swing the filter back into its original position until you hear it click into place. 4. Place the coffee jug with its lid on the warming plate (Fig. 7). 5. Pre-select number of cups Before switching the appliance on, select the required number of cups by using the aroma switch “S” (Fig. 2/C). The length of time the coffee takes to brew is varied by means of the aroma switch. Setting a small number of cups results in a longer brewing time, so that the water remains in contact with the ground coffee for longer and the aromatic ingredients in it are dissolved better. - KF1050: Press the aroma switch once (Fig. 2/C), and the indicator will appear for “min -4” as the number of cups (Fig. 2/E). This switch setting will guarantee you the full coffee aroma when you make up to four cups. Press the aroma switch again (Fig. 2/C) and the indicator for “min -4” will vanish from the display (Fig. 2/E). This is the correct setting for making two to ten cups. - KF 1064 and KF 1066 Black Line: The aroma switch (Fig. 2/C) guarantees you the full aroma regardless of the number of cups you make. You can select whether you wish to make up to 2, up to 4, up to 6, or up to 10 cups of coffee. When you plug your coffee-maker in to the mains, the aroma level “Up to 10 cups” will be selected because it is pre-set in the factory. The “10” will light up in the indicator for the number of cups (Fig. 2/E). By pressing, however, you can determine the number of cups to be made. Each time you press the aroma switch (Fig. 2/C), the indicator for the number of cups (Fig. 2/E) will move one step at a time downwards, starting with “10”. When the appliance is next switched on again, the figure for the number of cups will automatically appear which was selected last time. 6. Switching the appliance on Having selected the number of cups, switch the appliance on by means of the “Ol” button (Fig. 2/A). The pilot light (Fig. 2/B) will come on. After a few seconds, hot water starts to flow into the filter. Selecting the warming temperature (only KF 1064 and KF 1066 Black Line) In addition to the aroma function., your automatic coffee-maker provides every possibility for you to set it individually to suit your habits. When you press the aroma switch (Fig. 2/C), the middle level^ “2”, will appear (Fig. 2/0) because it is pre-set in the factory. By pressing the “ip” button for the warming level (Fig 2/N), however, you can pre-select a lower warming temperature independently of ...

Эта инструкция также подходит к моделям:
Кофеварки - KF 1066 (737.53 kb)
Кофеварки - KF 1066 (737.53 kb)
Кофеварки - KF 1064 (737.53 kb)
Кофеварки - KF 1050 (737.53 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории