Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
2 Apply the Cable Clip ....................................................... 15 Attach the Rod Pack ..................................................... 16 Tools........................................................................................... 2 Chest Bar with Pulleys................................................... 17 Important Safety Instructions................................................ 3 Leg Extension Rollers..................................................... 18 Hardware .................................................................................. 4 Attach the Bench ........................................................... 19 Attach Placard ............................................................... 20 Parts........................................................................................... 5 Level the Machine..........................................................21 Assembly .................................................................................. 7 Connect the Cables to the PowerRod® Unit, Chest Attach the Lower Lat Tower to the Base......................7 Bar, and Handgrips.........................................................22 Secure the Lower Lat Tower to the Base ..................... 8 Connect the Cables from the Chest Bar and Lat Assemble the Seat Rail.................................................... 9 Cross Bar to the Handgrips........................................... 23 Assemble the Leg Extension......................................... 10 Connect the Cables from the Chest Bar to the Attach the Seat Rail to the Leg Extension .................. 11 Leg Extension .................................................................. 24 Attach the Seat Rail to the Base Assembly ............... 12 Final Inspection............................................................... 24 Upper Lat Tower.............................................................. 13 Contacts................................................................................... 25 Attach the Upper Lat Tower to the Base Assembly ...............14 Before Assembly Select where you are going to locate your Bowflex® home gym carefully. The best location is on a hard, level surface. For best results, assemble your home gym in the location where you intend to use it. For safe operation, allow a workout area of at least 100” x 78” (2.6m x 2.0m) of free space. Follow these basic tips to make your assembly quick and easy. 1. Gather all the pieces you need for each step. 2. Turn all the bolts and locknuts toward the right to tighten. Turn towards the left to loosen. 3. Use a combination wrench to grip the locknut when you tighten a bolt that has a locknut to make sure it is tight. 4. All of the tools needed for assembly are included with the unit. You may find the use of a utility knife or scissors beneficial during the unpacking and assembly process. 5. When attaching two pieces, lightly lift and look through the bolt holes to help guide the bolt through the holes. 6. Assembly requires two people. NOTICE: Leave all of the cables wrapped and bagged until the Bowflex® home gym is completely assembled. Tools • (2) Adjustable Wrenches (not included) • Phillips Head Screwdriver (not included) 2 Assembly Manual Important Safety Instructions This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Obey the following warnings: Read and understand all warnings on this machine. Carefully read and understand the Assembly Manual. • Keep bystanders and children away from the product you are assembling at all times. • Do not assemble this machine outdoors or in a wet or moist location. • Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders. • Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own. • Set up this machine on a solid, level, horizontal surface. • Do not try to change the design or functionality of this machine. This could compromise the safety and can void the warranty. • If replacement parts are necessary use only genuine Nautilus® replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly or void the warranty. • Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Owner’s Manual. • Read and understand the complete Owner’s Manual supplied with this machine before first use. Keep the Owner’s and Assembly Manuals for future reference. 3 Assembly Manual Hardware (Hardware not actual size) Qty. 4 Item #1 5/16”x 3/4” Hex Head Bolt Qty. 5 Item #8 1/4” Washer Qty. 8 Item #2 3/8”x 3/4” Hex Head Bolt Qty. 4 Item #9 5/16” Washer Qty. 2 Item #3 3/8”x 2 3/4” Hex Hea...