The spill-resistant design lessens the chance of hot beverage burns and splashes. USER NOTICES The notices on this server should be kept in good condition. Replace unreadable or damaged labels. CLOSE REMOVE ONLY FOR DAILY CLEANING OPEN #12373.0000 #12356.0000 USING THE SERVER 1. Lock the cover in place on the server by turning it clockwise as far as it will go. 2. Locate the center of the server cover directly under the funnel dripout of a Bunn® coffee brewer when brewing directly into the serve

Coffee can be brewed directly into the server without removing the cover when used with an appropriate Bunn® coffee brewer. Place the server on a warming stand to keep the beverage hot at remote locations. The spill-resistant design lessens the chance of hot beverage burns and splashes. USER NOTICES The notices on this server should be kept in good condition. Replace unreadable or damaged labels. CLOSE REMOVE ONLY FOR DAILY CLEANING OPEN #12373.0000 #12356.0000 USING THE SERVER 1. Lock the cover

1. Unplug the grinder. 2. Remove Lid, wash in warm sudsy water, rinse and dry thoroughly. CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY. CAUTION: NEVER PLACE BASE OF APPLIANCE IN WATER OR OTHER LIQUIDS. 3. Use a stiff brush to remove any remaining coffee grinds or other ground food from inside the stainless steel bowl. 4. Clean exterior of base with a soft damp cloth and dry. Place lid on base for storing. 5. Turn upside down and wrap cord around cord storage on inside of base (see Figure 3). 4 LI

Coffee Grinder Use and Care Guide Models 1119, 1119B and 1119CAN • STAINLESS STEEL BLADES • EASY ACCESS CORD STORAGE • GREAT FOR MAKING FLAVORED COFFEES • 2-OUNCE CAPACITY FOR 12 CUPS OF COFFEE IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: • Read all instructions before using appliance. • Do not immerse motor base, cord or plug in water or other l

Remove all packaging materials before using. 2. Before using, wipe blades and stainless steel bowl with a damp lint-free cloth, wash and dry lid (see CARE AND CLEANING). CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY. CAUTION: NEVER PLACE BASE OF APPLIANCE IN WATER OR OTHER LIQUIDS. 3. Place up to 3.4 cup of coffee beans at a time into the stainless steel bowl. If a larger quantity is needed, grind in several small batches. 4. Place the lid on top of the base (see Figure 1). NOTE: The appliance wil

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of Bunn are not authorized to make modifications to this warranty or to make additional warranties that are binding on Bunn. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be

The agents, dealers or employees of Bunn are not authorized to make modifications to this warranty or to make additional warranties that are binding on Bunn. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. The Buyer shall give Bunn prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois, 62708-3227. If requested by Bunn, t

33736 072310 ADJUSTMENTS The grind can be set from very fine to very coarse. The amount may be adjusted for use in most commercial coffee brewers. The following procedures should be used to make adjustments. A change in the burr adjustment will also change the amount dispensed. Any adjustment of the burrs should be followed by an adjustment of the timer. Burr Adjustment 1. Unplug the grinder and empty all beans from the hoppers. 2. Plug in the grinder, press and release the GRIND button (with ei

Order late model Lid) Lid Assy, Reservoir (Includes items 7, 12 & 14) (Late models) 7 12332.0000 1 Gasket, Lid 8 12294.0000 1 Retainer Cap, Vent Ball 9 10 00598.0002 12288.0000 1 1 Ball, .50” Dia. Retainer Cap, Vent Ball Early models 11 00598.0001 1 Ball, .25” Dia. 12 - - - - - - - 29690.0004 1 1 Lid, Reservoir (Early models. Order Late Model Lid) Lid, Reservoir (Late models) 13 12327.0000 1 Ball, 20 mm Dia. (Early models) 14 - - - - - - - 12289.0001 1 1 Retainer Cap, Top Vent (Early models. Ord

(“BUNN”) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal servers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor. 2) All other equipment -2 years parts and 1 year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) Compressors on refrigeration equipment - 5 years parts and 1 year la