|
Фрагмент инструкции
Under these circumstances the guarantee will be void. -The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury. -Place the appliance on a flat firm surface. Ensure that it cannot fall into water and that no water can splash onto electrical parts. -Never place the appliance close to or in contact with liquids or steam. -Only clean the appliance when dry using a brush or a damp cloth. Warning: It is essential to disconnect the mains plug before cleaning. KEEP THESE INSTRUCTIONS INITIAL OPERATION Place the appliance on a level surface. Unreel the required length of cord. It is important to keep the cord short. Insert the cord into the power cord inlet provided so that it is clamped and insert the plug into the socket outlet. Pack the excess cord length in the cord-tidy (fig.10). Open the lid (fig.11) of the bean container, fill the bean container with the desired quantity of coffee beans (250g max.) (fig.12) and close the lid (fig.13). The appliance is then ready to operate. SETTING THE GRINDING CONTROL The main adjustment positions stated on the control for the degree of grinding are normally sufficient. The degree of grinding can be adjusted by twisting the bean container (fig 14). = fine grinding (e.g. for espresso coffee machines) = medium grinding (e.g. for filter coffee machines) machine by performing the above operation in reverse order. Housing and = coarse grinding (e.g. for BODUM® French Press® coffee maker) 3 4 transparent parts can be cleaned easily using a damp cloth. tel 0870 207 4831 | email mail@redmonkeycoffee.com GENERAL INFORMATION -BODUM® electrical appliances comply with accepted engineering codes of practice and the Law on Safety of Appliances (EEC Directive 73/23). They have been tested by the SEV and UL. -This appliance is radio-interference-suppressed in accordance with EC Directive 37/308/EEC. -The packaging material can be disposed of without harming the environment. POLARIZATION For US Customers only This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. For UK Customers only For appliances supplied with fitted plug. If the socket outlets in your home are not suitable for the plug supplied with your BODUM® appliance, it should be removed and appropriate plug fitted. Note: Once plug has been cut from mains lead, dispose of immediately as a bare flexible cord on an attached plug is dangerous if placed into a live socket. Important: If your electric coffee grinder is fitted with a non-rewirable plug please refer to the following section. Fitting a plug. Important: The wires in this mains lead are coloured in accordance with the following code: • BLUE NEUTRAL • BROWN LIVE As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug. Proceed as follows. The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. If a 13 Amp (BSI 1363) plug is used a 3 Amp fuse must be fitted, or if any other type of plug is used a 5 Amp fuse must be fitted either in the plug or adaptor or at the distribution board. Before connecting to the mains, check that the supply voltage is the same as that shown on the base of the electric coffee grinder. If you are in any doubt, consult a competent electrician or BODUM®. NeutralBlue NL Fuse Live Brown INSTRUCTION 5 ...
Эта инструкция также подходит к моделям:Кофемолки - 5670 (278.86 kb)