Оценок - 1, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Кассетные деки - TC-WE405 (160.51 kb)
Кассетные деки - TC-WE405 (548.28 kb)
Фрагмент инструкции
Advanced Recording Operations
z You should adjust the recording level manually with
Adjusting the Recording Level
REC LEVEL in the following cases:
—The recording level cannot be adjusted properly due
Automatically (Auto Rec Level)
to excessive noise in the program source.
—The program source level is too low and the recording
The Auto Rec Level function automatically measures
level does not increase.
the peak signal level and adjusts the recording level
During a quiet passage in a program source such as
accordingly.
classical music, the recording level may not increase
for some time. If a high sound level is expected later
on in the track, play that portion first so that the right
PAUSE P REC r ·
adjustment can be obtained.
—The recording level does not decrease for a long time.
AUTO
REC LEVEL
DIRECTION
DOLBY NR
D
a RELAY
OFF
B
C
5
4
6
3
7
The Auto Rec Level function may not work properly
SYNCHRO DUBBING A→B
2
8
HIGH/NORMAL
FADER
ARL
1
9
START(DECK B P)
DECK A
DECK B
PAUSE
REC MUTE
REC
0
10
COUNTER RESET
P
R
r
when you try to record sound produced by a graphic
0
)
0
)
PHONES
POWER
p
ª
·
p
ª
·
equalizer that has extremely high-level signals.
§
§
z To record with the optimum recording level
• To prevent changes in the recording level after
1 Follow Steps 1 to 3 of “Recording on a Tape” on
recording starts, press REC r while playing the
page 6.
highest sound level portion of the program source to
Make sure that record-protect tabs on the cassette
be recorded. The result is a more natural-sounding
have not been removed.
recording.
• If you play the entire program source after the AUTO
indicator has stopped flashing and is lit continuously,
2 Press REC r.
the deck will set the recording level for the portion of
The AUTO indicator flashes and the deck
the program source with the highest signal level.
automatically adjusts the recording level. The
AUTO indicator lights up continuously after the
recording level has been adjusted.
z Recording level setting remains even after the
recording has ended
After you have finished recording with the Auto Rec
3 Press PAUSE P or ·.
Level function, the AUTO indicator remains on and the
Recording starts.
recording level setting remains the same. To cancel the
setting, do one of the following:
To cancel the Auto Rec Level function
• Press ARL to turn off the AUTO indicator
Press ARL or turn REC LEVEL so that the AUTO indicator
• Turn REC LEVEL
goes off. If you do either of these during recording,
• Turn the deck off.
recording will continue but with the Auto Rec Level function
turned off.
To stop recording
Press p.
z What is the Auto Rec Level function?
The Auto Rec Level function automatically sets the
recording level according to the peak signal level of the
program source. While the AUTO indicator is flashing,
the deck sets the recording level as high as possible
without causing distortion. If the signal level rises
excessively after the start of recording, the deck
gradually decreases the recording level.
8EN
3-810-312-31(1)
...