Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
O In case of recording a FM broadcast,refer to discription of "How to use the MPX FILTER key". & O While pressing the PAUSE (8) key, press the REC/ARM (¦) key. 0dB. Recording level display. 1Make “Playback (recording) preparation”. 0 2(Load a disc in the CD player) Normal recording 1Select the source to be recorded. 3 2Perform auto-bias adjustment. (The bias adjustment is applied to deck B.) OThe optimum bias is set in about 50 seconds, after which the deck enters the stop mode. OFor a fine adjustment after setting AUTO BIAS, refer to the description of “Bias level adjustment”. & OTo cancel the auto-bias adjustment operation in the middle, press the stop (7) key. ORecording is possible even when the auto-bias setting is omitted. OIf the amount of remaining tape is small, the auto-bias adjustment may be canceled in the middle and tape stopped at that position. OThe bias level is canceled when the eject (0) key is pressed. 1Play a music source. 2Enter the record-pause mode. 3Press the MODE key and select the "BAL." mode. 4Adjust the recording balance. 5Press the MODE key and select the "LEVEL" mode. 6Adjust the recording level. 7Stop playing the source. Right sound decreases. Left sound decreases. Recording level decreases. Recording level increases. O In counter, adjust the recording balance level so that the left and right displays are the same. You can also check with the n and a peak level indicators. Left channel level Right channel level “AUTO BIAS”blinks. After approximately 50 seconds “AUTO BIAS” lightsup. Each press of the MODE key changes the setting. 1 “LEVEL” lights up: Recording level setting mode 2 “BAL.” lights up: Recording balance setting mode 3 “BIAS” lights up: Recording bias setting mode 4 “LEVEL”,“BAL.”, and “BIAS”go off: Counter display mode TAPE A AUTO REVERSE TAPE B AUTO REVERSE - ON . OFF 2 7 3 0 2 7 3 0 AUTO BIAS TAPE A AUTO REVERSE TAPE B AUTO REVERSE - ON . OFF 2 3 7 2 3 7 8PAUSE ¦REC/ARM MODE REC LEVEL/BAL /BIAS MIN/L MAX/R MODE REC LEVEL/BAL /BIAS MIN/L MAX/R TAPE A AUTO REVERSE TAPE B AUTO REVERSE - ON . OFF 2 3 7 2 3 7 TAPE A AUTO REVERSE TAPE B AUTO REVERSE - ON . OFF 2 3 7 2 3 7 TAPE A AUTO REVERSE TAPE B AUTO REVERSE - ON . OFF 2 3 7 2 3 7 TAPE A AUTO REVERSE TAPE B AUTO REVERSE - ON . OFF 2 3 7 2 3 7 TAPE A AUTO REVERSE TAPE B AUTO REVERSE - ON . OFF 2 3 7 2 3 7 : Keys and control used in the operations described on this page. 17 How to record (Deck B only) ORecording will start. OThe deck enters the stop mode automatically when the tape has been recorded till the end. Press once. 4Start recording. 1Press the REC/ARM (¦) key. 2Play the music source from the beginning. How to use the MPX FILTER key Depending on the tuner, a recorded FM broadcast may produce a “beat” sound. In this case, press the MPX FILTER key before recording. To cancel, press the MPX FILTER key again. lights up Use this function when recording a radio (FM) broadcasts. ¦REC/ARM TAPE A AUTO REVERSE TAPE B AUTO REVERSE - ON . OFF 2 3 7 2 3 7 TAPE A AUTO REVERSE TAPE B AUTO REVERSE - ON . OFF 2 3 7 2 3 7 MPX FILTER OTo adjust the bias level, play back the recorded sound and adjust to the suitable level.Repeat if necessary. OThe bias can be adjusted to a value of ±3. Bias level adjustment The MODE key can be used to adjust the bias level. lights up 1Press the MODE key and select the "BIAS" mode. 2Adjust the bias level. The high frequency decreases. The high frequency increases. Each press of the MODE key changes the setting. 1 “LEVEL” lights up: Recording level setting mode 2 “BAL.” lights up: Recording balance setting mode 3 “BIAS” lights up: Recording bias setting mode 4 “LEVEL”,“BAL.”, and “BIAS”go off: Counter display mode MODE REC LEVEL/BAL /BIAS MIN/L MAX/R TAPE A AUTO REVERSE TAPE B AUTO REVERSE - ON . OFF 2 3 7 2 3 7 TAPE A AUTO REVERSE TAPE B AUTO REVERSE - ON . OFF 2 3 7 2 3 7 How to record (Deck B only) To pause recording temporarily To stop recording Pause To resume recording OThe 8 indicator lights. 1Stop the tape transport. 2Stop playing the source component. 8PAUSE ¦REC/ARM TAPE A AUTO REVERSE TAPE B AUTO REVERSE -ON . OFF 2 37 2 37 2 37 How to provide non-recorded blanks between programs In stop mode During recording Press successively twice. Press once. ¦REC/ARM¦REC/ARM OAfter leaving a non-recorded blank of about 4 seconds, the deck enters the record-pause mode. Tape dubbing operation (Deck A \Deck B) The dubbing refers to the copy of the recorded contents of a tape to another tape (tape in Deck A \ tape in Deck B). Since this unit is not designed for recording with metal (TYPE IV) tapes, do not use metal tapes for recording. Preparation 1Load the tape to be played in deck A and the tape to be recorded in deck B. 0 2Set the tape transport directions of decks A and B to the same direction ( by press- ing the play (2 or 3) key then pressing the stop (7) key immediately after it ). 3Make "Playback (recording) preparation". Tape dubbing TAPE A AUTO REVERSE TAPE B AUTO REVERSE -ON . OFF 0 0 : Keys...
Эта инструкция также подходит к моделям:Кассетные деки - CT-405 (1.65 mb)