Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
OFF 2 37 2 37 Set the record-pause mode. Press 7 key of the CD player. Press the 6 key of the CD player. 1 Play a CD. 4Put the CD player in stop mode. 3 2Set the record-pause mode. OWhile pressing the PAUSE (8) key, press theREC/ARM (¦) key. 3Adjust the recording balance and recording level. “How to record.” ^ 8PAUSE ¦REC/ARM Start playing the CD. 8PAUSE ¦REC/ARM TAPE A AUTO REVERSE TAPE B AUTO REVERSE -ON . OFF 2 37 2 37 OWhile pressing the PAUSE (8) key, press the REC/ARM (¦) key. 4 Press the 6 key of the CD player. OSynchro recording is not possible when tracks of more than one CD are programmed using a Carrousel type CD player. ORecording starts at this moment. OWhen the CD player has completed playback, the cassette deck stops recording and enters the stop mode. To pause : Press the 6 key of the CD player. To restart recording : Press the 6 key of the CD player. To stop : Press the 7 key of the CD player. OIf the stop (7) key of the cassette deck is pressed, the cassette deck enters the stop mode but the CD player does not stop. Convenient CD recording (Deck B only) When connected with a KENWOOD amplifier,CD player provided with , " " marking through the system control cord, this unit allows to use the CCRS, which starts recording automatically after setting the optinum recording level for the CD and tape to be used in recording. Since this unit is not designed for recording with metal (TYPE IV) tapes, do not use metal tapes for recording. Preparation 1Complete the connections referring to "System connections". 6 2(Set the input selector of the amplifier to CD.) 3(Load a disc in the CD player.) (Edit tracks as required on the CD player.) TAPE A AUTO REVERSE TAPE B AUTO REVERSE -ON . OFF 2 37 0 2 37 0 : Keys and control used in the operations described on this page. Recording of CD playback (CCRS) (Deck B only) 2 2 1 1 Insert a tape in deck B. Determine the recording condition. 1Select the recording mode. 3 2Select the Dolby NR mode. TAPE A AUTO REVERSE TAPE B AUTO REVERSE -ON . OFF 2 37 2 37 TAPE A AUTO REVERSE TAPE B AUTO REVERSE -ON . OFF 2 37 2 37 DOLBY NR REV.MODE Press the CCRS key. CCRS TAPE A AUTO REVERSE TAPE B AUTO REVERSE -ON . OFF 2 37 2 37 OFor the tape direction setting, see the description below “Select the tape transport direction”. 0 Each press switches the indication. 1 “[ [[[[[” :Double-side recording. 2 “” OOOOO” :(Tape also stops after having recorded both sides.) 3 ““ OOOOO” :One-way recording. Each press switches the indication. 1 DOLBY NR “OFF” (extinguished): Dolby NR is not used. 2 DOLBY NR “B”: Noise reduction of the ordinary type. 3 DOLBY NR “C”: Noise reduction with higher performance. OSelect the Dolby NR mode according to the tape recording status. OProgram-edit recording is not possible when tracks of more than one CD are programmed using a Carrousel type CD player. OWhen performing CCRS recording with a CD player which can be loaded multiple compact discs, set the CD palyer to TRACK mode, press the disc selector key and press the CCRS key of the cassette deck. OThe CCRS indicator blinks, and actual recording starts in about 20 to 200 seconds (after creating a non-recorded blank of about 8 seconds). How to cancel CCRS During recording level setting: Press the Stop key of the CD player or the stop key of the cassette deck. During CCRS recording: Press the Stop key of the CD player, then press the OPEN / CLOSE key of the CD player. After completion of CCRS recording: Press the OPEN / CLOSE key of the CD player. OAfter recording, the cassette deck and CD player enter the stop mode automatically. OAfter completion of CCRS recording , be sure to cancel the CCRS and ensure that the CCRS indicator has gone off. NotesNotesNotes 1. If the CCRS key is pressed during CD playback, playback stops and CCRS operation begins. 2. If the remaining amount of tape is small, CCRS may not function correctly or CCRS operation may be canceled in mid-operation. 3. Once the CCRS recording level has been set, the recording balance and recording level cannot be adjusted while the CCRS operation is being carried out. 4. The CCRS function sets the peak level for the entire CD in approx. 20~200 seconds. On very rare occasions, however, the function may not be able to set the optimum recording level. If this occurs, carry out recording manually referring to the “Normal recording” section. ^ 5. The CCRS recording level setting is canceled when the open/close key of the CD player is pressed or when the power is switched OFF. 6. With CD players equipped with the EDIT function, it is possible to make recordings in which the last songs on sides A and B are not cut off in the middle and in which the recording capacity of the tape is used to the fullest extent. (Set the REV.MODE key of the deck to “[”.) Timer operations This unit incorporates a built-in timer standby function. By Audio timer To AC outlet using an audio timer optionally available in the market, wake-up playback and unattended recording of tape ...
Эта инструкция также подходит к моделям:Кассетные деки - KXF-W4030 (1.65 mb)