Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Space (non-recorded). Tune being played. To play a tune located immediately after the tune being played To play the tune being played from the beginning To play a tune located 4 tunes beyond Press 4 times during the playback. Press once during the playback. Press 5 times during the playback. DPSS will not function properly with the following types of tapes. O Tapes containing spaces of 4 seconds or more, such as conversations and speeches. O Tape containing extremely low levels or non-recorded spaces in the middle of tunes, such as classical music. O Tapes containing recording of large noise between tunes. O Tapes containing spaces of less than 4 seconds between tunes. O Tapes recorded with low recording level. O Tapes recorded using Cross-fade recording. Space (non-recorded). Press once during the playback. Notes : Keys or controls to be used in this operation (dB) — —5 0 +3 +6 (dB) (dB) — —5 0 +3 +6 (dB) (dB) — —5 0 +3 +6 (dB) (dB) — —5 0 +3 +6 (dB) 1 A 1 A 1 A 1 A Convenient music search (DPSS) (dB) — —5 0 +3 +6 (dB) TAPE B AUTO REVERSE TAPE A AUTO REVERSE POWER 1 @ 7 # @ 7 # A 1 A 8PAUSE ¦REC/ARM PUSH/OPEN 0 PUSH/OPEN 0 The figure shows an example for the CT-403 or KXF-W3030 13 Single-tune repeated playback operation When direction of tape direction indicator is 3: ONormal playback resumes after repeating the same tune for 16 times. OPress the stop (7) key to stop playback and cancel this operation. 1Play the tune to be repeated. 2Press the play key of the same direction as the current tape transport direction. 3 (dB) — —5 0 +3 +6 (dB) (dB) — —5 0 +3 +6 (dB) (CT-403/KXF-W3030) (CT-401/KXF-W1030) Convenient music search (DPSS) 14 How to record (deck B only) Since this unit is not designed for use with metal tapes, recording on metal tapes cannot be carried out. Insert a tape in deck B. 2Select the source to be recorded. 1Set up the cassette deck. O Press to record with the DOLBY NR. 2 Select the recording mode. (CT-403/KXF-W3030 only) : Keys or controls to be used in this operation 1 Select the Dolby NR mode. 1 Dolby NR on 2 Dolby NR off O Each press switches the indication. 1 “[” :Double-side recording which stops tape after having recorded both sides. 2 “O” :Recording stops after having recorded both sides. 3 “O” :One-way recording which stops tape after having recorded a single side. (dB) — —5 0 +3 +6 (dB) (dB) — —5 0 +3 +6 (dB) (dB) — —5 0 +3 +6 (dB) @ 7 # 1 A 8PAUSE ¦REC/ARM TAPEB AUTO REVERSE PUSH/OPEN 0 A DOLBY NR REV.MODE Preparation 4Start recording. 2 Enter the record-pause mode. 1 Play a music source. 3 Adjust the recording level. 1 Play the music source from the beginning. 2 Press the OREC/ARM key. 3Set the recording level. 4 Stop playing the source. O Adjust so that segments around the 0 dB segment of the peak level meter light up at times. Press once. (dB) — —5 0 +3 +6 (dB) (dB) — —5 0 +3 +6 (dB) REC LEVEL MIN MAX ¦REC/ARM (dB) —5 0 +3 +6 (dB) OWhile pressing the PAUSEkey, 8PAUSE ¦REC/ARM press the REC/ARM key. O Recording will start. O The deck enters the stop mode automatically when the tape has been recorded till the end. (CT-401/KXF-W1030) (dB) — —5 0 +3 +6 (dB) The figure shows an example for the CT-403 or KXF-W3030 (dB) — —5 0 +3 +6 (dB) TAPE B AUTO REVERSE TAPE A AUTO REVERSE POWER 1 @ 7 # @ 7 # A 1 A 8PAUSE ¦REC/ARM PUSH/OPEN 0 PUSH/OPEN 0 DOLBY NR DOLBY NR Lit Goes off Dolby NR on Dolby NR off How to record (deck B only) To pause recording temporarily Pause To resume recording 8PAUSE ¦REC/ARM To stop recording 2Stop playing the source component. 1Stop the tape transport. 7(dB) — —5 0 +3 +6 (dB) How to provide non-recorded blanks between programs In stop mode During recording Press successively twice. Press once. ¦REC/ARM ¦REC/ARM OAfter leaving a non-recorded blank of about 4 seconds, the deck enters the record-pause mode. Dolby noise reduction system The Dolby noise reduction system was developed to reduce the tape hiss noise generated during playback. The optimum effect of the Dolby NR system is obtained when the same type NR system is used for both recording and playback. If a different type NR system is used, playback is not performed correctly. Make sure that the same type noise reduction system is used for both recording and playback. Dolby B NR The most popular noise reduction system used in home audio components. Usually, Dolby NR system corresponds to B NR. Tape dubbing operation The dubbing refers to the copy of the recorded contents of a The figure shows an example for the CT-403 or KXF-W303016 tape to another tape (tape in Deck A = tape in Deck B). : Keys or controls to be used in this operation (dB) — —5 0 +3 +6 (dB) TAPE B AUTO REVERSE TAPE A AUTO REVERSE POWER 1 @ #7 @ #7 A 1 8PAUSE ¦REC/ARMA PUSH/OPEN 0 PUSH/OPEN 0 1 1 Insert tapes in the cassette decks. Tape to be played Tape to be recorded onto Deck A Deck B(dB) — —5 0 + 3 +6 (dB) POWER 1 @ #7 @ #7 A 1 8PAUSE ¦REC/ARMA TAPEB AUTOREVERSE PUSH/OPEN0 TAPEB AUTOREVERSE PUSH/OPEN 0 A A 2 2 Start dubbi...
Эта инструкция также подходит к моделям:Кассетные деки - CT-401 (533.7 kb)
Кассетные деки - CT-403 (533.7 kb)
Кассетные деки - KXF-W3030 (533.7 kb)