Войти:
Оценок - 2, средний балл: 3 ( )

Инструкция по эксплуатации Kenwood, модель CT-403

Производитель: Kenwood
Размер: 533.7 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


2Start playback. CT-403 /KXF-W3030 or 2 Load a cassette tape in deck A or B. (Normal playback) Load cassette tapes in both decks. (Relay playback) 1 Set the POWER switch to ON. Press the area marked PUSH/OPEN 0. 1 Dolby NR on 2 Dolby NR off : Keys or controls to be used in this operation Normal playback (dB) — —5 0 +3 +6 (dB) TAPE B AUTO REVERSE TAPE A AUTO REVERSE POWER 1 @ 7 # @ 7 # A 1 A 8PAUSE ¦REC/ARM PUSH/OPEN 0 PUSH/OPEN 0 POWER - ON . OFF PUSH/OPEN 0 (dB)— —5 0 DOLBYNR 77 1 8P A RECL PUSH/OPEN 0 (dB) — —5 0 DOLBYNR 77 1 8 A REC PUSH/OPEN 0 (dB) — —5 DOLBY NR 77 1 A OBe sure to remove tape slack before insertion. OThe type of tape, that is, the Normal, High position or Metal position (playback only) is selected automatically. OThis unit cannot record sound on a Metal tape. O Be sure to close the cassette holder securely by pushing it. DOLBY NR (dB) — —5 0 +3 +6 (dB) (dB) — —5 0 +3 +6 (dB) REV.MODE O Each press switches the indication. 1 “[” :Double-side playback which stops tape after having played both sides. 2 “O” :Playback is endless. 3 “O” :One-way playback which stops tape after having played a single side. @ 7 # 3 CT-401 /KXF-W1030 O Tapes are played in the directions indicated by their respective indicators. (CT-403/KXF-W3030) O Playback stops automatically at the end of tape. (CT-401/KXF-W1030) The figure shows an example for the CT-403 or KXF-W3030 DOLBY NR DOLBY NR Lit Goes off Dolby NR on Dolby NR off Preparation 11 Fast Forward and Rewind 2 Press the 1 key or A key. 1 Stop playback. 1: Fast tape winding in the | direction A: Fast tape winding in the \ direction Listening to cassette tapes O When taking out the tape, press the area marked PUSH/ OPEN 0 after the tape transport has stopped completely. To stop playback (dB) — —5 0 +3 +6 (dB) (dB) — —5 0 +3 +6 (dB) (dB) — —5 0 +3 +6 (dB) 7 7 1 A O Press the stop (7) key to stop fast tape winding. 2Determine the playback conditions. 1 Select the Dolby NR mode. 2 Select the playback mode. O Set to OFF the Dolby NR key when playing a tape recorded without using Dolby NR. 3Start playback. 1 Dolby NR on 2 Dolby NR off Relay playback (CT-403/KXF-W3030 only) DOLBY NR (dB) — —5 0 +3 +6 (dB) (dB) — —5 0 +3 +6 (dB) REV.MODE O Each press switches the indication. 1 “[” :Relay playback of two sides of tapes in decks A and B is repeated. 2 “O” :Relay playback is not available with this setting. 3 “O” :Relay playback of one side only for deck A and deck B, and then playback stops. @ 7 # (dB) — —5 0 +3 +6 (dB) O Tapes are played in the directions indicated by their respective indicators on the display. O The playback starts with the deck the play key of which is pressed. Press stop (7) key of the deck that is playing. To Stop relay playback (dB) — —5 0 +3 +6 (dB) 7 This function plays back the tapes in both decks A and B continuously and repeatedly. DOLBY NR DOLBY NR Lit Goes off Dolby NR on Dolby NR off 1Load cassette tapes in both decks. 0 12 Skip play operation To play the tune located 4 tunes behind The DPSS (Direct Program Search System) enables the following convenient operations according to the instructions of the operation keys (these operation are however not available on both decks simultaneously). The DPSS functions are based on the detection of non-recorded spaces of 4 seconds or more between tunes. The example below shows the case in which the direction indicated by the tape transport direction indicator is 3. If the direction indicated by the tape direction indicator is 2, always press the keys for the opposite directions to those shown in the illustrations below. Tape transport direction \. 1. Skip play : By specifying a tune located several tunes beyond (or behind) the tune being played, skips tunes between the current tune and the selected tune and starts playback from the beginning of the selected tune. Up to 16 tunes can be skipped in Skip Search. 2. Single-tune repeated playback : One single tune is played back repeatedly up to 16 times. Space (non-recorded). Tune being played. To play a tune located immediately after the tune being played To play the tune being played from the beginning To play a tune located 4 tunes beyond Press 4 times during the playback. Press once during the playback. Press 5 times during the playback. DPSS will not function properly with the following types of tapes. O Tapes containing spaces of 4 seconds or more, such as conversations and speeches. O Tape containing extremely low levels or non-recorded spaces in the middle of tunes, such as classical music. O Tapes containing recording of large noise between tunes. O Tapes containing spaces of less than 4 seconds between tunes. O Tapes recorded with low recording level. O Tapes recorded using Cross-fade recording. Space (non-recorded). Press once during the playback. Notes ­ ­ ­ ­ ­ ­ ­ ­ ­ : Keys or controls to be used in this operation (dB) — —5 0 +3 +6 (dB) (dB) — —5 0 +3 +6 (dB) (dB) — —5 0 +3 +6 (dB) (dB) — —5 0 +3 +6 (dB) 1 A 1 A 1 A 1 A Convenient music sea...

Эта инструкция также подходит к моделям:
Кассетные деки - CT-401 (533.7 kb)
Кассетные деки - KXF-W1030 (533.7 kb)
Кассетные деки - KXF-W3030 (533.7 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории