Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
2. CLEANING THE FRAME Only clean the frame when it is cold. The painted frame of the Fusion should be cleaned using a damp cloth and buffed with a lint free duster. INSTALLATIONINSTRUCTIONSCovering Models 8699GP and 8699 IR1. GENERAL 1.1 These instructions are supplemental to, and must be read in conjunction with, the Installation Instructions (PR0741 for E-Studio & Logic E-Box Conventional Flue and the Balanced Flue version in PR0776) supplied with the fire. 1.2 Fitting of the Fusion frame must be carried out after the appliance has been fully installed and commissioning tests completed. 2. PREPARATION OF WALL FIXING FOR FUSION The Fusion hooks onto a wall bracket (supplied). • Centre the wall bracket above the fire and at the distance from the hearth, or base of appliance (if wall mounted), shown in Diagram 1 2.1 For the Fusion: • Find the fire's centre point across its width and mark • Mark 1023mm from the hearth, or base of appliance (if wall mounted), to establish the correct height 1AR2170height measured to the centre top of bracket = 993mmcentre point993mm 2.2 To fix the wall bracket: • Secure the bracket into place with the screws supplied • Lift and hook the frame onto the bracket, Diagram 2 • Centre the frame 2AR21668wall bracket 3. SECURING FUSION FRAME TO THE FIRE 3.1 Access to the controls is behind the drop down lower cover. There are two fixing brackets either side of the controls: • Secure frame to the firebox at the base with screws supplied to ensure rigid fixing, Diagram 3 3AR2169 USER INSTRUCTIONS 1. CONTROLS ACCESS To access the fire's controls with a Futura Frame fitted: • Push the control panel firmly in the centre to release the magnetic catch Details of the controls (and Replacing the Batteries, if applicable) are given in the User section of the fire’s Instruction manual. 2. CLEANING THE FRAME Only clean the frame when it is cold. • Clean the glass with a non-abrasive proprietary glass cleaner and wipe over with a soft cloth INSTALLATIONINSTRUCTIONSCovering Models 8687 1. GENERAL 1.1 These instructions are supplemental to, and must be read in conjunction with, the Installation Instructions (PR0741 for E-Studio & Logic E-Box Conventional Flue and the Balanced Flue version in PR0776) supplied with the fire. 1.2 Fitting of the Futura frame must be carried out after the appliance has been fully installed and commissioning tests completed. 2. PREPARATION OF WALL FIXING FOR FUTURA The Futura is in two parts: a back panel which fits to the wall; a front panel that hooks onto the fixed back panel. 4.1 Back Panel The back panel hooks onto a wall bracket (supplied). • Find the fire's centre point across its width and mark • Mark 1081 mm from the hearth or base of appliance (if wall mounted) to establish the correct height • Centre the wall bracket above the fire and at the distance from the hearth or base of appliance (if wall mounted) shown in Diagram 1 1AR2170height measured to the centre top of bracket = 1081mmcentre point1081m...
Эта инструкция также подходит к моделям:Камины - Fusion 8699 GP/IR (134.08 kb)
Камины - Fusion 8699 IR (134.08 kb)