Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
You can connect up to two devices with either one of the enclosed IR blaster cables, and then control the devices using the TV’s IR pass- through or TheaterNet™ (on-screen device control) features. See pages 21 and 44. !. IEEE-1394 — Two bi-directional digital IEEE-1394 ports for connecting multiple devices with compressed digital video. Because these ports are bi-directional, they can be used for playback and recording. You can control your IEEE-1394 devices using the TV’s TheaterNet on-screen control icons. See pages 21–24 and 44. NOTE: • IEEE-1394 cable carries both audio and video information; no separate audio cables are required for a complete connection. •NEVER CONNECT THIS TV TO A PERSONAL COMPUTER (PC). This TV is not intended for use with a PC. !™ CableCARD™ slot — For use with a digital security card and digital Cable TV service (provided by your local Cable operator) to view encrypted digital programming. See pages 12 and 51. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. CableCARD is a trademark of Cable Television Laboratories, Inc. 10 10 Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. 51,57HX94(E)009-11 10 9/12/04, 6:59 PM Chapter 2: Connecting your TV NOTE: NEVER CONNECT THIS TV TO A PERSONAL COMPUTER (PC). THIS TV IS NOT INTENDED FOR USE WITH A PC. Note: Two dual-wand IR blaster /G-LINK cables are included with your TV. All other required cables, if not provided with your other devices, can be purchased at many electronics accessory suppliers. . Coaxial (F-type) cable is used for connecting your antenna, cable TV service, and/or cable converter box to the ANT-1 and/or ANT-2 RF inputs on your TV. . Standard A/V cables (composite video) usually come in sets of three, and are for use with video devices with standard audio and standard (composite) video output. These cables (and the related inputs on your TV) are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio. . S-video cable is for use with video devices with S-video output. Separate audio cables are required for a complete connection. Note: An S-video cable provides better picture performance than a composite video cable. If you connect an S-video cable, be sure to disconnect the standard (composite) video cable or the picture performance will be unacceptable. . Component video cables come in sets of three and are for use with video devices with component video output. (ColorStream® is Toshiba’s brand of component video.) These cables are typically color-coded red, green, and blue. Separate audio cables are required for a complete connection. Note: Component video cables provide better picture performance than a standard (composite) video or S-video cable. . HDMI cable is for use with devices with HDMI (high-definition multimedia interface) output. HDMI cabl...
Эта инструкция также подходит к моделям:Телевизоры - 51HX94 (4.15 mb)
Телевизоры - 51HX94 (4.15 mb)
Телевизоры - 57HX94 (4.15 mb)