Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Wood Inserts «/REGENCY ^R' FIREPLACE PRODUCTS I1200 Small Wood Insert I1200 Wood Insert Model I1200S Cordwood BTU's 55,000 BTU's EPA g/hr 3.0 g/hr Flue Size 6” (152mm) Unit with Standard Flue Adaptor 9-11/16“ (246mm) 8-1/4* (210mm) Minimum Fireplace Opening Faceplate Dimensions Height 19” (483mm) Standard 3 Sided 38” (width) x 26-1/8” (height) Width 23” (584mm) Standard 4 Sided 38” (width) x 34-1/8” (height) Depth Standard Flue Adaptor 13-3/4” (349mm) Oversize 3 Sided 44” (width) x 30-1/8” (height) Depth Offset Flue Adaptor 16-1/2” (419mm) Oversize 4 Sided 44” (width) x 38-1/8” (height) Unit with Offset Flue Adaptor 22-3/4” (578mm)- -E 1 Cf - 21-3/8” (543mm)- June 2007 Regency Product Specifications Book 187 Wood Inserts Wood Inserts ^R] EGENCY Wood Inserts FIREPLACE PRODUCTS I1200 Wood Insert I1200 Small Wood Insert Dimension Description I1200 A Adjacent Side Wall (to side) 15” (381mm) B Mantle (to top)** 20” (508mm) C Top Facing (to top) 14” (356mm) D Side Facing (to side) 7-3/8” (187mm) E Minimum Hearth Extension* 16” (406mm) F Minimum Heath Thickness* 1-1/2” (38mm) G Minimum Hearth Side Extension 8” (203mm) Side and Top facing is a maximum of 1-1/2" thick. Floor protection must be non-combustible, insulating material with an R value of 1.1 or greater. * If the hearth extension is flush with the floor (F) it must extend 19-1/2" in front of the body face (E). Note: Hearth Extension Width (G) is measured from edge of fuel door to side of hearth. ** A non-combustible mantel may be installed at a lower height if the framing is made of metal studs covered with a non-combustible board. 188 June 2007 Regency Product Specifications Book...